Furniture oil clear V33 0.5 L for wood protection and finishing

Clear furniture oil V33 0.5 L is a wood finishing product designed for treating and protecting interior wooden furniture and joinery. The transparent formula penetrates the wood surface to nourish fibres, enhance the natural grain and provide a satin, natural-looking finish that preserves the character of the wood while delivering basic protection against everyday wear and moisture.

Advantages

This furniture oil penetrates and nourishes wood without forming a thick surface film, allowing the material to retain a natural touch and appearance. The clear finish highlights grain and colour variations, is easy to maintain and can be selectively renewed on worn areas. Application requires minimal surface preparation compared with film-forming coatings, and the product is suitable for a range of interior wooden items where a natural oiled look is desired.

Suitable for

• Dining tables, coffee tables and kitchen worktops with low to moderate use
• Chairs, benches and stools
• Wooden shelves, cupboards and interior joinery
• Visible wood surfaces where a natural, transparent finish is preferred

Key specifications

• Volume: 0.5 litre
• Finish: clear, natural-looking, satin
• Application type: penetrating oil treatment
• Surface: interior wood (furniture, joinery)
• Typical coverage: depends on wood species and porosity; low to medium consumption for one coat

How to use

Ensure surfaces are clean, dry and free of dust, wax or old flaking coatings. Sand if necessary to obtain a smooth, absorbent surface and remove sanding dust. Apply the oil evenly with a lint-free cloth, brush or sponge following the wood grain. Allow the oil to penetrate for a few minutes, then remove excess with a clean cloth to avoid sticky residues. For greater protection, apply a second light coat after the first has dried according to the manufacturer instructions. Allow adequate drying time before use.

Usage recommendations

Test the oil on an inconspicuous area or a sample piece of the same wood to check appearance and absorption. Maintain oiled surfaces periodically by cleaning with a mild detergent and reapplying oil to worn zones as needed to restore appearance and protection.