Floor paint V33 Perf Dark Grafite 2L — interior floor coating, 2 L

V33 Perf Dark Grafite 2L is an interior floor coating in a deep graphite shade formulated for prepared indoor floor surfaces. This 2 litre paint provides both decorative finish and protective wear resistance for floors that require maintenance, refurbishment or aesthetic updating. The product is intended for use on substrates compatible with V33 floor paints and delivers a uniform, matte to satin appearance depending on application technique and base surface.

Advantages

The paint offers a durable surface that resists everyday wear and contributes to easier cleaning and maintenance. Its dark graphite colour conceals minor imperfections and evens out surface appearance while providing consistent coverage with good hiding power. The 2 L volume is suitable for moderate-size rooms and maintenance projects, enabling complete coverage without frequent reloading. The formulation is designed for interior use, minimizing outdoor weathering issues and focusing performance on indoor durability and resistance to foot traffic.

Suitable for

• Interior wooden floors that have been properly prepared and sanded
• Concrete or cement floors that are primed and free of dust, grease and loose particles
• Renovation projects in apartments, utility rooms, basements and workshops
• Maintenance repainting to refresh colour and add surface protection

Key specifications

• Colour: dark graphite
• Volume: 2 litres
• Finish: typically matte to satin depending on application and substrate
• Intended use: interior floor surfaces
• Performance: wear-resistant coating suitable for foot traffic

How to use

Ensure the floor is clean, dry and sound; remove grease, dust, loose paint and contaminants. For wooden floors, sand and fill gaps as required and use a recommended primer if specified for the substrate. For concrete, repair cracks and apply a suitable primer to improve adhesion. Stir the paint thoroughly before use. Apply with a brush, roller or suitable applicator in thin, even coats, allowing recommended drying time between coats for optimal hardness and coverage. Follow ventilation and drying guidance on the product label and apply at recommended ambient temperature and humidity for best results.

Usage recommendations

Test the paint on a small inconspicuous area or sample board to confirm colour and finish on your specific substrate before full application. Use protective equipment, ensure good ventilation during application and curing, and follow any surface-specific preparation instructions to achieve durable adhesion and an even graphite finish.