Primer base paint VALLEJO 73.612 0.06 L — ready-mixed primer for metal and plastic

VALLEJO 73.612 is a ready-mixed base primer supplied in a 0.06 L container, formulated for use on metal and plastic surfaces common in modeling and small repairs. This primer creates a uniform, adherent surface that preserves fine detail while preparing parts for subsequent paint layers. It is suitable for direct application or for dilution with compatible thinners and is intended to provide a consistent foundation for both brush and airbrush finishes.

Advantages

This ready-mixed primer offers good adhesion to resin, PVC, brass, white metal and wood and preserves the smallest model details. It dries rapidly to form a homogeneous, durable film with resistance to handling and subsequent paint layers. The formulation is compatible with dilution for airbrush use and allows even coverage in multiple thin layers, reducing the risk of clogging or obscuring surface detail.

Suitable for

• Preparation of plastic and metal model kits and miniatures
• Small repair work and touch-ups on painted parts
• Priming resin, PVC, brass, white metal and wooden components
• Airbrush and brush applications when diluted appropriately

Key specifications

• Form: ready-mixed liquid primer in 0.06 L container
• Intended substrates: metal and plastic (resin, PVC, white metal, brass, wood)
• Application methods: brush or airbrush (can be diluted)
• Drying: rapid drying to a durable, homogeneous film within hours
• Compatibility: suitable for use under acrylic and model paints

How to use

Shake the container well before use. Apply the primer in several thin, even layers rather than one thick coat to preserve surface detail. For airbrush application, dilute with an appropriate airbrush thinner or flow improver and set the compressor to low pressure (approximately 15–20 PSI / 0.5–1 kg). Allow adequate drying time between coats; a few hours are typically sufficient for the film to form and harden. Clean tools and airbrush equipment after use with a compatible cleaner.

Usage recommendations

For best results, prepare the surface by removing dust, oil or release agents; use Vallejo Airbrush Thinner or Flow Improver for airbrush work and Vallejo Airbrush Cleaner for maintenance. Apply multiple thin coats and allow full drying between layers to ensure adhesion and to maintain fine details.