Wall extractor fan VENTS OV2E300, ø300 mm, 145 W, 58 dB, black

VENTS OV2E300 is a wall-mounted extractor fan with a 300 mm nominal diameter and a 145 W motor. Designed to remove stale air and moisture from residential and light-commercial interiors, this model forces exhaust air through an external wall. The fan’s black finish integrates with dark décor and utility areas while its reported noise level of 58 dB makes it suitable for spaces where moderate sound is acceptable. Typical installation locations include bathrooms, kitchens and utility rooms that require mechanical extraction rather than passive ventilation.

Advantages

The VENTS OV2E300 provides reliable airflow for forced extraction applications and is built for continuous or intermittent operation in domestic and small commercial settings. Its 300 mm impeller diameter and 145 W motor deliver enhanced extraction capacity compared with smaller fans, while the black housing offers visual flexibility for installations where appearance matters. The specified noise level of 58 dB represents a balance between performance and acoustic impact for rooms that tolerate moderate operational sound.

Suitable for

• Bathrooms and shower rooms requiring regular moisture removal
• Kitchens and food-preparation areas where smoke or cooking odors need extraction
• Utility rooms, laundries and boiler rooms with excess humidity or heat
• Small commercial premises that need wall-mounted mechanical ventilation

When it may not be suitable

This wall extractor fan may not be appropriate for very quiet environments such as bedrooms, offices or study rooms where lower noise levels are required. It is also not intended for large industrial spaces or long duct runs without checking the required airflow and static pressure capacity against the installation requirements.

Key specifications

• Impeller diameter: 300 mm nominal
• Rated power: 145 W
• Reported sound level: 58 dB at standard operating conditions
• Mounting type: wall-mounted through external wall
• Color/finish: black housing
• Typical application: forced exhaust ventilation for residential and light-commercial spaces

How to use

Install the VENTS OV2E300 in a suitably prepared wall opening following local building and electrical codes. Connect the fan to the appropriate power supply and any required controls such as a timed switch, humidity sensor or separate on/off switch. Position the fan so the exhaust duct path is as short and straight as possible to reduce resistance and maintain performance. Perform regular visual inspections and clean the impeller and housing if needed to prevent dust buildup and to ensure continued airflow.

What to consider before purchase

• Confirm that the 300 mm nominal diameter and 145 W power meet the required airflow for your room size and duct length
• Assess acceptable noise levels for the intended room (58 dB reported during operation)
• Ensure wall thickness and mounting location allow through-wall installation and sealing
• Verify electrical supply compatibility and whether additional controls (timer, humidity sensor) are needed

Usage recommendations

For best results, combine the fan with a short, straight exhaust path and use a humidity sensor or timer in bathrooms to limit runtime. Regular cleaning and periodic inspection will maintain performance and extend service life.