3D printing ABS filament VERBATIM 1 kg 1.75 mm Black

VERBATIM ABS filament for 3D printing, 1 kg spool with a 1.75 mm diameter in black is a material extrusion filament designed for FDM/FFF printers that accept 1.75 mm feed. Formulated from high-performance Acrylonitrile Butadiene Styrene (ABS), this filament offers high rigidity and gloss with medium impact strength. It is suitable for prototyping and producing functional parts that require machining or post-processing, and is supplied as a single pack in a box.

Advantages

This ABS filament provides high rigidity and a glossy surface finish while retaining good workability after printing. It resists grease and allows for secondary operations such as sanding, drilling or machining. The material is optimized for reliable feeding on any 1.75 mm FDM/FFF printer and delivers consistent layer adhesion and dimensional stability for concept models and non-critical functional parts. Note that ABS emits a pronounced odor during printing and may require adequate ventilation or an enclosure.

Suitable for

• Prototyping and concept modelling for building and industrial design
• Enclosures and housings for non-critical electronic or electrical parts
• Automotive and engineering fixtures where rigidity and machinability are needed
• Functional parts that require post-processing such as sanding or drilling

Key specifications

• Material: Acrylonitrile Butadiene Styrene (ABS)
• Filament diameter: 1.75 mm
• Spool weight: 1 kg
• Colour: Black
• Mechanical properties: high rigidity, medium impact strength
• Surface finish: high gloss
• Chemical resistance: resistant to grease
• Post-processing: suitable for sanding, drilling and machining

How to use

Load the 1.75 mm VERBATIM ABS filament into an FDM/FFF printer compatible with this diameter. Recommended printing conditions vary by printer and part geometry; typically use a heated bed and an enclosed build chamber or active ventilation to manage warping and fumes. Print with appropriate nozzle temperature for ABS and adjust bed temperature and first-layer settings to improve adhesion. Allow printed parts to cool gradually to reduce internal stresses before post-processing.

Usage recommendations

Use a heated build platform and consider an enclosure or active extraction to control fumes and reduce warping. For improved adhesion, apply a suitable build surface or adhesive and calibrate first layer height. For best finishing results, allow parts to cool slowly, then perform sanding, drilling or machining as needed. Avoid use in high-temperature continuous service where ABS mechanical properties may degrade.