Concrete drill bit Verto cylindrical 10 mm model 60H194

Concrete drill bit Verto cylindrical 10 mm model 60H194 is a solid rotary drill designed for creating 10 mm diameter holes in concrete and masonry. Intended for use with electric drills that accept cylindrical shanks, the bit is suitable for tasks such as installing anchors, preparing dowel holes and making through-holes in renovation and repair work where a precise 10 mm bore is required.

Advantages

The Verto cylindrical 10 mm concrete drill bit offers a robust single-piece design that ensures consistent concentricity and reduced wobble during drilling. Its tip geometry is optimized for penetrating hard mineral materials, providing stable cutting action and reliable progress in concrete and brick. The cylindrical shank allows compatibility with a wide range of standard drill chucks, simplifying tool setup on many electric drills. The solid construction improves durability under common construction and renovation loads.

Suitable for

• Drilling 10 mm holes in concrete and reinforced concrete
• Installing wall anchors and expansion fasteners
• Making holes in brick, block and other masonry materials
• General renovation, repair and light construction tasks

Key specifications

• Drill diameter: 10 mm
• Shank type: cylindrical (straight) shank for standard chucks
• Material compatibility: concrete, masonry, brick, block
• Design: solid one-piece rotary drill bit

How to use

Secure the drill bit in the drill chuck ensuring the cylindrical shank is clamped firmly and runs true. Select an appropriate drilling speed and, if available, use hammer-drill mode only if the bit and machine specification allow. Begin drilling with light pressure to establish the cut, then apply steady force—do not overload the bit to avoid premature wear. Clear dust from the hole periodically to maintain cutting efficiency and to achieve an accurate 10 mm diameter hole.

Usage recommendations

For best results, match drilling speed and feed pressure to the hardness of the material and use personal protective equipment such as eye protection and dust mask. When installing anchors, verify hole depth and cleanliness before inserting fasteners. Replace the bit once wear affects drilling accuracy or penetration rate.