Mounting kit Verto 60H270, mounting set for hidden connections, 14 pieces, 280 g

Verto 60H270 mounting kit is a 14-piece set for creating concealed joints in wood. The kit includes a drilling template, three drill bits, caps, screws, a hex key and interchangeable guide inserts. It is designed to drill board-to-board connections at an accurate 15° angle and allows adjustable drilling depth to suit different material thicknesses.

Advantages

The kit provides a complete solution for invisible wood-to-wood connections, with three interchangeable guide sizes for flexibility and an adjustable depth stop for consistent results. Its components are compact and easy to handle, making the system suitable for precise joinery without specialised machinery.

Suitable for

• Joining wooden boards edge-to-edge where the fasteners must remain hidden
• Cabinet and furniture assembly requiring angled concealed joints
• Repairing or reinforcing wooden panels and shelving

When it may not be suitable

This kit is intended for solid wood or wood-based boards; it may not be suitable for very hard exotic timbers or metal components. For very thin or highly brittle panels the drilling process can cause splitting, so test on a scrap piece first.

Key specifications

• Number of pieces: 14
• Drill angle: 15° for angled concealed connections
• Drill bit sizes: 10 mm, 8 mm and 6 mm
• Adjustable drilling depth
• Includes drilling template, guide inserts, caps, screws and hex key
• Weight (pack): approximately 280 g

How to use

Mark the joint positions on both boards, fit the drilling template and select the appropriate guide insert for the board thickness. Use the matching drill bit and set the depth stop to the required penetration. Drill at the specified 15° angle using the template to keep alignment, insert the connector and secure with the provided screws and caps. Check alignment and tighten as needed.

What to consider before purchase

• Suitability for the wood type and board thickness you plan to join
• Compatibility of 6/8/10 mm drill diameters with your reinforcement design
• Whether the 15° angled joint matches your assembly requirements

Usage recommendations

For best results, practice on scrap material to set depth and alignment, use clamps to hold boards steady while drilling, and choose the guide size matching the board thickness to avoid split edges.