Masonry drill bit set Verto 60H302 — 8 pcs, sizes 4,5,5,6,6,7,8,10 mm

Masonry drill bit set Verto 60H302 — 8 pcs, sizes 4,5,5,6,6,7,8,10 mm is a collection of eight carbide-tipped masonry drills designed for creating clean holes in brick, concrete and similar masonry materials. Each bit features a fine-grit sintered carbide tip for improved cutting performance and enhanced resistance to high temperatures. The ground flute design reduces drilling forces and improves dust evacuation, making the set suitable for common renovation and installation tasks where reliable performance is required.

Advantages

The combination of fine-grit sintered carbide tips and heat-resistant construction ensures longer tool life under heavy use. Ground flutes reduce friction and make drilling smoother with less effort from the operator. The set covers a useful range of diameters from small to medium holes, allowing flexibility for anchor installation, conduit passages and various fastening applications. Bits are compatible with standard drills and are intended for practical everyday use by DIYers and tradespeople.

Suitable for

• Drilling holes for wall plugs and anchors in brick and concrete
• Creating passages for conduits and cables in masonry
• Installation of fixtures, shelves and brackets on masonry surfaces
• General renovation and repair work involving masonry drilling

Key specifications

• Set composition: 8 drill bits
• Available diameters: 4 mm, 5 mm, 5 mm, 6 mm, 6 mm, 7 mm, 8 mm, 10 mm
• Tip material: fine-grit sintered carbide
• Flute design: ground flute for reduced drilling forces
• Material suitability: brick, concrete and similar masonry
• Compatibility: designed for use with standard rotary drills and hammer drills (use appropriate mode for material)

How to use

Select the drill bit diameter appropriate for the anchor or fastener you plan to install. Secure the bit in the drill chuck and set the drill to the recommended mode for masonry (hammer function when required). Start drilling at low speed to establish the starting point, then increase speed while applying steady, even pressure. Periodically withdraw the bit to remove debris and allow the tip to cool. Ensure the drilled hole depth matches the length of the anchor or fixture before installation.

Usage recommendations

Wear appropriate personal protective equipment such as safety glasses and a dust mask when drilling masonry. For harder concrete or prolonged drilling, operate the drill in short intervals to avoid overheating the carbide tips. Use the correct drill mode (hammer or rotary) and choose the bit diameter matched to the fastener for secure anchoring.