SDS+ masonry drill bit Verto 5 mm model 60H626 for concrete, carbide tip

The SDS+ masonry drill bit Verto 5 mm model 60H626 is designed for drilling into concrete, brick and general masonry. It features an SDS+ shank for fast, secure insertion into compatible hammer drills and rotary hammers, and a carbide-tipped head engineered to resist wear and create clean, accurate holes. The bit is intended for common construction and renovation tasks such as installing anchors, dowels and through-holes.

Advantages

The SDS+ shank enables quick bit changes and stable retention in hammer drills and rotary hammers. The carbide tip increases durability and maintains cutting performance when encountering abrasive materials. The 5 mm diameter provides a balance between precision and strength for typical anchoring and fixing tasks, while the fluted body helps evacuate dust and debris to maintain drilling efficiency.

Suitable for

• Drilling holes in concrete for anchors and dowels
• Creating through-holes in brick and block walls
• Pre-drilling for fixings during renovation and construction
• Use with SDS+ compatible hammer drills and rotary hammers

When it may not be suitable

This masonry drill bit is not intended for drilling into metal, wood or ceramic tiles; using it on those materials may reduce life and performance. It is sized at 5 mm, so it is not suitable for applications that require larger-diameter holes or specialized hole shapes.

Key specifications

• Diameter: 5 mm
• Shank type: SDS+
• Tip material: Carbide
• Primary use: Concrete, brick, masonry
• Compatible tools: Hammer drills and rotary hammers with SDS+ chuck

How to use

Fit the SDS+ shank of the drill bit into the hammer drill or rotary hammer until it locks. Select hammer or rotary-hammer mode depending on the tool and material. Start drilling at low speed to position the bit, then increase power and maintain steady pressure without forcing the tool. Periodically withdraw the bit to clear dust and allow the carbide tip to cool; use water only if recommended by your tool and workplace safety rules. Replace the bit when cutting performance degrades or if the tip becomes damaged.

What to consider before purchase

• Confirm your drill accepts SDS+ shanks
• Verify 5 mm diameter meets the required hole size for anchors or fixings
• Check material compatibility—designed for concrete, brick and masonry

Usage recommendations

Use in SDS+ hammer drills or rotary hammers in hammer mode for best results. Maintain moderate, steady pressure and clear dust regularly to prolong bit life. Replace the bit when holes become oversized or drilling efficiency drops.