Drill bit Verto SDS+ 16 mm for concrete, model 60H632

The Verto SDS+ 16 mm drill bit (model 60H632) is designed for drilling in concrete and masonry. Its SDS+ shank provides secure retention in compatible rotary hammers and enables fast, tool-free bit changes. With a 16 mm diameter this drill bit is suitable for creating medium-sized holes for anchors, dowels and general installation work in reinforced concrete and stone surfaces.

Advantages

The SDS+ connection ensures stable engagement with rotary hammers, reducing wobble during drilling and improving accuracy. The 16 mm cutting diameter balances material removal speed and control, making it appropriate for standard fastening and repair tasks. The drill geometry is optimized for efficient drilling in dense materials, while the hardened steel construction increases wear resistance and prolongs service life under typical jobsite conditions.

Suitable for

• Drilling anchor and dowel holes in concrete and masonry
• Installation of fixtures and mounting brackets
• Repair and renovation work on reinforced concrete surfaces
• Preparing passages for conduits and pipes through masonry

Key specifications

• Shank type: SDS+
• Nominal diameter: 16 mm
• Primary use: concrete and masonry drilling
• Suitable tool type: rotary hammer with SDS+ chuck
• Typical applications: anchor and dowel hole drilling, installation and repair tasks

How to use

Install the drill bit into the SDS+ chuck of a compatible rotary hammer until it locks. Select an appropriate drill speed and hammer setting for concrete and start drilling with steady axial pressure, allowing the tool to do the work without excessive force. Periodically withdraw the bit to clear dust and debris from the hole, improving bit cooling and drilling efficiency. For reinforced areas, advance slowly and avoid excessive lateral loads to prevent premature wear or breakage.

Usage recommendations

Use appropriate personal protective equipment including safety glasses, hearing protection and gloves. For deep or long holes, withdraw the bit frequently to remove dust. Match drill diameter to anchor/dowel specifications and use a rotary hammer with sufficient impact energy for dense concrete. Store the bit in a dry place to avoid corrosion and inspect for wear before use.