Concrete drill bit Verto SDS+ 10 mm (model 60H635)

Concrete drill bit Verto SDS+ 10 mm (model 60H635) is designed for rotary and rotary‑hammer drilling in concrete, masonry and natural stone. The bit has an SDS+ shank that provides quick tool‑free bit changes and secure retention in SDS+ rotary hammers. With a 10 mm diameter it is suitable for creating anchor holes, dowel installation and through‑holes where precise diameter and robust impact performance are required.

Advantages

The Verto SDS+ 10 mm concrete drill bit combines compatibility with SDS+ chucks and a carbide tip geometry engineered for impact drilling. Its reinforced flute profile evacuates dust efficiently while maintaining straight drilling. The durable construction supports repeated use in demanding construction and renovation environments without introducing unnecessary vibration or wobble.

Suitable for

• Drilling anchor and dowel holes in concrete and reinforced concrete
• Making through‑holes in masonry and natural stone
• Preparation of fixing points for structural and non‑structural fasteners

Key specifications

• Diameter: 10 mm
• Shank type: SDS+
• Intended materials: concrete, masonry, stone
• Drilling modes: rotary and rotary‑hammer (hammer drilling)
• Tip: carbide cutting tip designed for impact drilling

How to use

Select an SDS+ compatible rotary hammer and insert the bit into the chuck until it locks. For anchoring and doweling, mark the hole position, start drilling at low speed to establish the guide point, then switch to hammer mode and apply steady axial pressure. Withdraw the bit periodically to clear dust and prevent clogging of the flute. For through‑holes, maintain alignment and moderate feed rate to avoid bit wandering.

Usage recommendations

Use personal protective equipment including eye protection, dust mask and hearing protection. Match drill speed and hammer settings to the material; use lower speeds for reinforced concrete and increase feed pressure gradually. Replace the bit when wear reduces cutting performance or accuracy.