Drill Bit Verto SDS+ 10 mm (model 60H647) for Concrete

The Verto SDS+ 10 mm drill bit (model 60H647) is intended for rotary and hammer drilling in concrete and masonry. With an SDS+ shank for quick, secure insertion into compatible rotary hammers, this 10 mm diameter bit is suitable for creating standard anchor holes, dowel placements and through-holes in solid and hollow concrete. The geometry of the tip and flute design supports controlled chip removal and steady drilling progress when working with dense building materials.

Advantages

This SDS+ 10 mm drill bit delivers reliable centring and stable performance in concrete and similar substrates, while the standardized shank system ensures fast tool changes and firm retention during hammering. Its 10 mm diameter provides a balance between hole size for common fasteners and efficient penetration speed, making it practical for both single-hole tasks and repetitive anchoring work.

Suitable for

• Drilling anchor and dowel holes in concrete and masonry
• Making through-holes for pipes and conduits in building structures
• Routine onsite repair and renovation drilling tasks
• Professional construction and advanced DIY projects requiring SDS+ rotary hammers

Key specifications

• Diameter: 10 mm
• Shank type: SDS+
• Intended materials: Concrete, masonry
• Drilling mode: Rotary with hammer action
• Typical applications: Anchoring, dowelling, through-holes

How to use

Select an SDS+ compatible rotary hammer and secure the bit by inserting the shank until it locks in place. Mark the drilling location and, if necessary, start with a low rotation speed or pilot setting to position the bit. Apply steady axial pressure and engage the hammer action for efficient penetration into concrete; withdraw periodically to clear debris in deeper holes. After drilling, remove dust from the hole before installing anchors or fasteners.

Usage recommendations

Use appropriate personal protective equipment (safety goggles, hearing protection and dust mask) and clamp or support workpieces as needed. For longer life and consistent results, avoid excessive side pressure, match drill speed and hammer power to bit diameter, and clear debris during drilling. Replace the bit when wear degrades cutting performance or centring ability.