Drill bit Verto SDS+ 12 mm for concrete, MPN 60H650

Verto SDS+ 12 mm drill bit for concrete is a purpose-built rotary-percussion drill accessory for SDS+ hammer drills. With a 12 mm working diameter and a carbide tip shaped for impact drilling, this bit is intended to bore clean holes in concrete, brick and other masonry materials for anchors, dowels and through-holes. The SDS+ shank ensures secure fitting in compatible rotary hammer chucks and efficient transfer of percussive energy for stable drilling performance.

Advantages

The drill bit combines a robust carbide tip and a hardened steel body to resist wear when drilling abrasive masonry. Its SDS+ shank enables quick insertion and reliable locking in SDS+ hammer drills, reducing slippage during intensive use. The 12 mm diameter offers a balance between hole strength and acceptable drilling speed for common anchoring and fixing tasks. The geometry is optimized to evacuate dust and improve bit guidance during rotary-percussion operation.

Suitable for

• Drilling anchor and dowel holes in concrete and reinforced concrete
• Creating through-holes for pipes and cables in masonry walls
• Installation and repair work where SDS+ rotary hammers are used
• Construction and renovation tasks requiring medium-diameter masonry holes

Key specifications

• Working diameter: 12 mm
• Shank type: SDS+
• Tip material: carbide-tipped
• Intended materials: concrete, brick and general masonry
• Application: rotary-percussion (hammer) drilling

How to use

Fit the SDS+ shank securely into the hammer drill's chuck according to the tool manufacturer's instructions. Select the hammer drilling mode and apply steady axial pressure while letting the tool deliver percussion action; avoid excessive lateral forces that can break the bit. For deep holes, periodically withdraw the bit to clear dust and debris to maintain drilling efficiency and cooling of the cutting edges. Use appropriate drill speed and feed pressure for the material being drilled.

Usage recommendations

Wear eye and hearing protection and a dust mask when drilling masonry. Match the hole diameter to the anchor or dowel specifications and use a depth stop if precise depth is required. Replace the bit if tip wear or damage reduces drilling performance.