Drill bit Verto SDS+ 22 mm for concrete, model 60H668

Verto SDS+ drill bit 22 mm (model 60H668) is designed for drilling in concrete and other masonry materials. It has an SDS+ shank that allows quick insertion and secure retention in compatible rotary hammer drills, enabling efficient drilling of 22 mm holes for anchors, dowels and through-fixings in construction and renovation tasks.

Advantages

The SDS+ connection reduces slipping and accelerates bit changes, while the 22 mm diameter is suitable for standard anchor and dowel sizes used in structural and finish work. The bit is manufactured for impact drilling in hard substrates and provides a stable drilling trajectory when used with a rotary hammer. Its geometry balances material removal and bit life for typical building-site applications.

Suitable for

• Drilling 22 mm holes in concrete for anchor and dowel installation
• Creating passages for through-fixings and bolts in masonry
• Renovation and repair tasks requiring repeated impact drilling
• Use with SDS+ compatible rotary hammer drills on dense substrates

Key specifications

• Shank type: SDS+ for rotary hammer compatibility
• Drill diameter: 22 mm suitable for common anchors and dowels
• Intended material: concrete and masonry
• Drilling method: percussion/impact drilling with hammer action

How to use

Insert the Verto SDS+ drill bit into the chuck of a compatible rotary hammer until it locks. Select the hammer-drilling mode on the tool and position the bit tip at the marked drilling point. Apply steady axial pressure; allow the tool's impact action to perform the cutting and avoid excessive side force. Withdraw the bit periodically to clear dust and improve cooling when making deep holes. After drilling, clean the hole before installing anchors or dowels.

Usage recommendations

Use appropriate personal protective equipment including eye protection, hearing protection and dust mask when drilling. Match drill speed and pressure to the substrate hardness and use a hammer drill with SDS+ chuck rated for the bit size. For precise anchor installation, verify hole depth and clean debris with a brush or compressed air before fitting anchors.