Stair treads VidaXL model 3283034, solid oak, brown, 100 x 30 x 2 cm, set of 8

Set of 8 solid oak stair treads VidaXL model 3283034, each measuring 100 x 30 x 2 cm, finished in brown. These wooden stair treads are intended to replace or cover existing indoor stair steps, providing a hardwood surface with natural oak grain and consistent dimensions for even installation. The pre-finished brown surface reduces initial treatment needs and simplifies maintenance while preserving the appearance of solid oak.

Advantages

Solid oak construction ensures a hardwearing surface that resists everyday abrasion better than softwoods. Uniform dimensions (100 x 30 x 2 cm) and a set of eight treads make the product suitable for multi-step staircases and reduce the need for on-site sizing. The brown pre-finish provides a ready-to-install appearance and reduces the need for immediate sanding or staining. Oak’s natural grain and color variations give each tread a distinct look while maintaining overall visual consistency.

Suitable for

• Replacing worn indoor stair steps on wooden or concrete staircases
• Covering existing treads to refresh staircase appearance without full renovation
• DIY stair refurbishment projects where uniform plank sizes are required
• Interior applications in homes, apartments, and light-traffic commercial areas

When it may not be suitable

These solid oak treads are intended for indoor use; they are not designed for prolonged outdoor exposure or for environments with high humidity such as unventilated sauna areas. Because the product comes pre-finished in brown and with fixed dimensions, it may not be suitable where a different finish, custom thickness, or non-standard dimensions are required. Installation on very irregular or heavily damaged stair stringers may require additional preparation or professional adjustment.

Key specifications

• Material: solid oak (hardwood)
• Finish: brown pre-finished surface
• Dimensions per tread: 100 x 30 x 2 cm (length x width x thickness)
• Quantity: set of 8 treads
• Intended use: indoor stair treads for covering or replacing steps

How to use

Measure existing stair steps and check that the 100 x 30 cm dimensions match or can be adapted to your staircase. Prepare the existing treads or stringers by ensuring surfaces are clean, level, and structurally sound. Position each oak tread, trim or plane edges as needed for a precise fit, and secure using appropriate screws, adhesive, or a combination recommended for hardwood stair installations. Allow any seam filling or caulking to cure before traffic. Follow basic sanding and re-finishing instructions if a custom finish is required after installation.

What to consider before purchase

• Verify the 100 x 30 x 2 cm dimensions suit your existing stair geometry and riser overhangs
• Confirm indoor installation environment and acceptable moisture conditions for solid wood
• Determine whether pre-finished brown color matches your interior or will require re-finishing
• Plan for tools and fixings for hardwood installation, or consider professional fitting if unsure

Usage recommendations

For durable results, acclimatize the oak treads in the installation environment for 48–72 hours before fitting, secure to properly prepared supports, and use non-abrasive cleaners for routine maintenance to preserve the finish and wood surface.