Stair Treads VidaXL model 3283045 brown 90×30×2 cm solid oak set of 12

Set of 12 brown stair treads from VidaXL, each measuring 90×30×2 cm and made of solid oak. These wooden stair tread boards are intended for replacing, renovating or finishing indoor stair steps to achieve a continuous oak surface. The solid oak construction provides a dense, wear-resistant walking surface suitable for domestic and light commercial staircases where a durable hardwood finish is required.

Advantages

Solid oak material offers natural hardness and long-term durability while maintaining an even brown appearance that can be stained or oiled to match existing decor. Each tread is milled to a uniform size to simplify fitting and create a consistent look across a full staircase. The 2 cm thickness ensures sufficient stability for standard indoor use and allows for sanding or refinishing if needed during installation or future maintenance.

Suitable for

• Replacing worn or damaged indoor stair steps in private homes
• Finishing new staircases to achieve a continuous oak surface
• DIY renovation projects where pre-cut hardwood treads are required
• Light commercial or office staircases with moderate foot traffic

When it may not be suitable

These stair treads are designed for indoor use only and are not intended for exterior stairs or wet environments. They may not be suitable for heavy industrial locations or high-traffic commercial environments where thicker, reinforced treads or non-slip surfaces are required. Installation on unusually shaped or non-standard stair profiles may require additional cutting, shaping, or professional carpentry.

Key specifications

• Material: solid oak wood
• Color: brown (natural oak finish)
• Dimensions per tread: 90 × 30 × 2 cm (length × width × thickness)
• Quantity: set of 12 treads
• Intended use: indoor stair treads for renovation and finishing

How to use

Measure existing stair steps and verify that the 90 × 30 cm dimensions match or can be adapted to the current staircase. If necessary, trim the treads to fit using appropriate woodworking tools and follow standard safety procedures. Prepare the substructure by ensuring steps are clean, dry, and level. Fix the oak treads using suitable adhesives and/or screws designed for hardwood and the specific stair construction; consider countersinking and covering screw heads for a neat finish. Sand, stain or oil the surface as desired and allow recommended drying times before use.

What to consider before purchase

• Confirm that 90 × 30 × 2 cm per tread matches your stair dimensions and nosing profile
• Ensure indoor installation only; not suitable for outdoor or permanently wet locations
• Plan for trimming or profiling if stairs have rounded or irregular edges
• Decide whether additional finishing (stain, lacquer, oil) is required for color match and protection

Usage recommendations

For a durable result, acclimatize the oak treads in the installation environment for 48–72 hours before fitting, use hardwood-specific adhesive and corrosion-resistant fasteners, and apply a protective finish suited to the expected foot traffic. Regular inspection and occasional refinishing will extend the service life of the stair treads.