Desk top panel VidaXL 100×60×2.5 cm with cutout, raw mango wood

VidaXL desk top panel made from raw mango wood, measuring 100×60×2.5 cm, with an integrated cutout. This solid wooden panel is intended as a replacement or custom surface for desks and workstations. The raw mango wood displays a natural grain and is supplied unfinished, allowing sanding, staining, painting or sealing to match a variety of styles and work environments. The panel’s 2.5 cm thickness provides a stable surface for everyday use and DIY projects.

Advantages

The raw mango wood construction combines visible natural grain with a uniform, solid feel that is suitable for further processing. Supplied unfinished, the panel gives flexibility for customization—sanding, painting, varnishing or oiling—so it can integrate with existing furniture or form the basis of a new desk. The cutout in the board is pre-made to accommodate cables, a monitor arm, or other desktop fittings, saving time during installation. At 100×60 cm and 2.5 cm thick, the panel balances portability with sufficient rigidity for typical home and office desk use.

Suitable for

• Replacement desktop for desks and computer workstations
• DIY desk builds and custom furniture projects
• Home office setups where a natural wood surface is desired
• Workshops for sanding, painting, staining or other finishing work

When it may not be suitable

Because the panel is made of raw, unfinished mango wood, it requires finishing before long-term use in humid or high-wear environments. The surface will need sanding and sealing if exposed to liquids, heavy abrasion, or continuous heavy loads. The integrated cutout has a fixed position and size; if your workstation layout requires a different cutout placement or shape, this panel may not match your needs.

Key specifications

• Material: raw mango wood (unfinished)
• Dimensions: 100 × 60 × 2.5 cm (length × width × thickness)
• Finish: raw / unfinished — suitable for sanding, staining, painting or oiling
• Feature: integrated cutout for cables or fittings
• Construction: solid wooden panel

How to use

Measure your desk frame or supports to confirm compatibility with the 100×60 cm panel before installation. If necessary, sand the surface and edges to achieve a smooth finish and remove any milling residues. Apply your chosen finish—stain, lacquer, varnish or oil—allowing proper drying time between coats according to the product instructions. Position the panel on a suitable desk frame or supporting structure, align the cutout to accommodate cables or accessories, and fasten the panel using suitable screws or brackets through the underside to avoid damaging the visible surface.

What to consider before purchase

• Panel is supplied raw and unfinished — plan for sanding and finishing before regular use
• Confirm that the 100×60 cm size and cutout position match your desk frame and accessory layout
• 2.5 cm thickness is sturdy but verify load requirements for heavy equipment
• Natural wood grain means color and pattern will vary between panels

Usage recommendations

For best results, sand progressively from coarse to fine grit, then apply a protective finish appropriate for your intended use (e.g., water-resistant varnish for frequent liquid exposure or hardwax oil for a more natural feel). When mounting, use brackets or screws from the underside and allow finishes to cure fully before placing equipment on the surface.