VidaXL rectangular table top 100 x 60 x 1.5 cm is a reclaimed solid wood panel designed as a ready-to-use surface for dining tables, desks, workbenches and DIY furniture projects. The plank preserves the natural wood texture and grain from reclaimed timber, offering a durable flat surface with visible knots and colour variations typical of reused wood. Its rectangular shape and moderate thickness make it suitable for replacing an existing tabletop or creating a custom piece that requires a sturdy wooden panel.
Advantages
This reclaimed solid wood table top provides a robust and naturally textured surface that is both functional and environmentally conscious. Its construction from reclaimed timber reduces demand for new wood while maintaining strength and a rustic aesthetic. The panel’s 100 x 60 cm dimensions and 1.5 cm thickness make it easy to handle and integrate into existing frames or custom supports, and the untreated or lightly finished surface allows for sanding, staining or sealing to match specific design needs.
Suitable for
- DIY table and desk projects
- Replacing worn or damaged tabletops
- Workshop benches and craft surfaces
- Small dining or café tables
- Custom shelving or cabinetry fronts where a flat, solid wood panel is needed
When it may not be suitable
The reclaimed solid wood surface may show knots, cracks, colour variations and other markings that are inherent to reused timber; these are not defects but natural characteristics. Because the panel is relatively thin at 1.5 cm, it may not be suitable for heavy-load structural applications or for use without adequate support or reinforcement.
Key specifications
- Shape: Rectangular
- Dimensions: 100 x 60 cm
- Thickness: 1.5 cm
- Material: Reclaimed solid wood
- Surface: Natural wood grain with visible knots and variations
- Finish: Untreated or lightly finished (suitable for sanding, staining or sealing)
How to use
Position the table top on a suitable frame, legs or support structure that provides continuous support along the edges and centre to prevent sagging. If planning to finish the surface, sand lightly to remove rough spots and apply the chosen stain, oil or sealer following the manufacturer's instructions for drying time and number of coats. Fasten the top to the base using screws or brackets through pre-drilled holes in the support frame rather than directly through the top where possible, and check alignment before final tightening.
What to consider before purchase
- Verify the 100 x 60 x 1.5 cm dimensions against your intended frame or support.
- Consider that reclaimed wood shows natural imperfections and colour variation.
- Plan for additional reinforcement if using for heavy loads or long spans.
- Decide whether you will sand, stain or seal the surface to match your finish requirements.
Usage recommendations
For best results, mount the panel on a rigid frame with centre support, treat the surface with an appropriate sealer for protection against moisture and stains, and use furniture pads or mounts to distribute load evenly. Regular maintenance such as re-oiling or resealing will extend the life and appearance of the reclaimed wood tabletop.
