USB-C to USB-C Cable VISION TC 15MUSBC/BL — 15 m, USB 3.2, 3 A, Nickel-plated Contacts, Black

VISION TC 15MUSBC/BL is a 15 m USB-C to USB-C cable that supports USB 3.2 data transfer and power delivery up to 3 A. The cable has nickel‑plated USB‑C connectors and a black jacket, designed for long-reach connections between laptops, monitors, docking stations and mobile devices where high-speed data and basic power delivery are needed. It supports display signals up to 4K at 60 Hz and uses a directional design: the connector marked “display” must be connected to the display.

Advantages

The cable combines a fiber-reinforced construction with a Kevlar core to increase resistance to stretching forces, rated for continuous tensile loads up to 200 N and short-term peaks up to 400 N. Its fiber construction enables tighter bend radii than typical copper cables, with a dynamic bend radius of 20 mm and a static bend radius of 10 mm. Nickel‑plated contacts improve conductivity and corrosion resistance for stable signal and power transfer.

Suitable for

• Connecting laptops to external monitors supporting USB-C video (4K @ 60 Hz).
• Long-distance USB-C data connections between computers, docks and peripherals.
• Powering or charging devices that accept up to 3 A over USB-C.
• Installations requiring a durable, low‑bend‑radius cable routing.

When it may not be suitable

This cable is directional and contains chips in each connector; the end marked “display” must be connected to the display, so it cannot be used interchangeably. It supports up to USB 3.2 Gen 1 signaling (compatible with 2‑lane and 4‑lane configurations where both devices support 4 lanes), and power delivery is limited to 3 A — it is not suitable when higher PD currents (for example 5 A or higher) or USB4/Thunderbolt maximum throughputs are required.

Key specifications

• Length: 15 m
• Connector type: USB-C to USB-C (straight male to straight male)
• Data standard: USB 3.2 (Gen 1 signal support)
• Maximum display: 4K @ 60 Hz
• Maximum current: up to 3 A
• Contacts: nickel‑plated
• Construction: fiber cable with Kevlar core
• Directional cable with display-marked end
• Dynamic bend radius: 20 mm; static bend radius: 10 mm

How to use

Connect the end marked “display” to the monitor or TV input and the opposite USB-C end to the source device (laptop, docking station or mobile device). Ensure both connected devices support the intended video and data modes; for 4‑lane configurations both devices must support 4 lanes. Route the cable avoiding sharp kinks and keep within the stated static/dynamic bend radii. For power delivery, confirm the device accepts up to 3 A over USB-C.

What to consider before purchase

• Whether your devices support USB 3.2 Gen 1 and the required video/data lane configuration.
• If you require higher than 3 A power delivery or Thunderbolt/USB4 bandwidth (this cable does not provide those higher specifications).
• The cable is directional — check that the display-marked end matches your installation layout.
• Length and routing requirements to ensure the 15 m run and bend radii are suitable for your installation.

Usage recommendations

For reliable video and data performance, connect the display-marked end to the monitor, avoid tight repetitive flexing near connectors, and confirm both devices support the desired USB‑C video/data configuration before use.