Facade paint VIVACOLOR Villa Akva L Grey 7040 — 9 L

VIVACOLOR Villa Akva L Grey 7040 — 9 L is a water-based facade paint formulated for exterior walls. This 9-liter container provides pigmented grey 7040 coverage designed for masonry, plaster and concrete surfaces. The formulation balances decorative finish with protection against weathering, offering a breathable coat that integrates with common façade substrates while maintaining colour stability under outdoor conditions.

Advantages

The paint offers uniform pigmentation and good coverage in a single-tone grey, reducing the number of coats required on properly prepared surfaces. Its water-based composition allows for easier application and cleaning of tools compared with solvent-based products. The coating is designed to be resistant to natural weather influences and to help protect surfaces from moisture penetration while preserving vapor permeability.

Suitable for

• Masonry facades
• Exterior plaster (render)
• Concrete walls and panels
• Renovation of building exteriors where a mid-tone grey finish is desired

Key specifications

• Type: Water-based exterior façade paint
• Colour: Grey 7040 (pigmented)
• Volume: 9 litres
• Substrate compatibility: masonry, plaster, concrete
• Finish: matte to low-sheen typical for façade paints
• Breathability: designed to permit vapor diffusion

How to use

Ensure surfaces are clean, dry and free of loose material, salts and mildew. Repair cracks and uneven areas, then prime highly absorbent substrates if required. Stir the paint thoroughly before use. Apply with brush, roller or airless spray in accordance with local application guidelines, maintaining recommended coverage rates and drying times between coats. Allow sufficient curing time before exposure to heavy rain or frost.

Usage recommendations

For best results, store and apply the product at moderate temperatures and avoid painting in direct sunlight or at temperatures below manufacturer-recommended limits. Test a small area to confirm adhesion and colour appearance on the intended substrate. When repainting, remove loose previous coatings and ensure compatibility with existing finishes.