Primer VIVACOLOR 1 0.9 L, white — surface primer for paint preparation

VIVACOLOR Primer 1 0.9 L, white is a surface primer formulated to prepare interior substrates for subsequent paint coatings. Supplied in a 0.9-litre container, this white primer improves adhesion of topcoats, evens out surface absorbency and creates a uniform base that helps achieve consistent coverage and finish quality when painting walls and ceilings.

Advantages

The primer enhances bond between substrate and paint, reducing the risk of peeling and uneven wear. It equalizes absorbent and less absorbent areas to prevent patchiness and uneven sheen. The white tint helps improve topcoat opacity and reduces the amount of decorative paint needed for full coverage. The product is ready to apply after appropriate surface preparation and dries to a matt, receptive surface suitable for most water-based and many solvent-based topcoats.

Suitable for

• Prepared interior plaster, drywall and cement-based surfaces
• Previously painted walls where adhesion or absorbency is uneven
• Renovation projects requiring improved topcoat coverage
• Surfaces before applying water-based or compatible solvent-based decorative paints

Key specifications

• Colour: white
• Container volume: 0.9 litre
• Type: surface primer for interior use
• Main functions: adhesion promotion, absorbency equalisation, base for topcoats
• Finish after drying: matt, paint-receptive

How to use

Ensure surfaces are clean, dry and free of dust, grease and loose material. Repair cracks and fill holes, then sand smooth if necessary. Stir the primer thoroughly before use. Apply with a brush, roller or suitable spray equipment in an even coat. Allow the primer to dry fully according to ambient temperature and ventilation before sanding lightly if required and applying the chosen topcoat. Avoid application at temperatures below the manufacturer’s recommended minimum or in conditions of high humidity.

Usage recommendations

For best results, test on a small area first to confirm compatibility with the substrate and intended topcoat. Apply one even coat for normal absorbency; for highly porous surfaces a second coat may be beneficial. Maintain adequate drying time between primer and topcoat to ensure optimal adhesion and finish.