Paint VIVACOLOR HANSA SOKKEL A-primer 0.9 L — façade and plinth primer

VIVACOLOR HANSA SOKKEL A-primer 0.9 L is a ready-to-use façade and plinth primer formulated to prepare exterior masonry, concrete and rendered surfaces for finishing coats. Supplied in a 0.9-litre container, the primer balances substrate absorption, improves adhesion of topcoats and helps achieve an even, long-lasting exterior finish when used beneath exterior paints or protective coatings.

Advantages

This façade and plinth primer is ready for immediate application without dilution, creating a uniform surface that reduces spotty absorption and surface porosity differences. It promotes strong adhesion between the substrate and subsequent coats, contributing to improved durability and resistance to peeling. The product is suitable for common exterior substrates such as masonry, concrete and rendered walls and supports consistent paint appearance and easier application of finishing layers.

Suitable for

• Priming exterior masonry and brickwork before painting
• Preparing concrete surfaces and rendered façades for topcoat application
• Treating plinths and base areas to improve adhesion of protective coatings
• Balancing substrate absorption on uneven or porous exterior surfaces

Key specifications

• Form: ready-to-use liquid primer
• Volume: 0.9 litre container
• Intended surfaces: masonry, concrete, rendered surfaces, plinths
• Function: improves adhesion, evens substrate absorption, supports uniform topcoat appearance

How to use

Ensure the surface is clean, dry and free of loose material, dust, oil or mildew. Stir the primer gently before use. Apply with a brush, roller or suitable low-pressure sprayer in an even coat, taking care to cover porous areas thoroughly. Allow the primer to dry according to ambient conditions before applying finish paint or protective coatings. Follow standard surface preparation and safety practices for exterior painting.

Usage recommendations

For best results, apply the primer at temperatures within the manufacturer's recommended range and on substrates that are fully cured and free of salts, efflorescence or contamination. Use a single uniform coat to equalize absorption; on highly porous substrates a second coat may be necessary. Allow adequate drying time before applying topcoats and protect freshly primed areas from rain or frost until cured.