Paint for Socle Hansa Sokkеl 2.7L — VIVACOLOR

VIVACOLOR Paint for Socle Hansa Sokkеl 2.7L is a ready-to-use coating formulated for protective and decorative finishing of socles, plinths and base areas on both exterior and interior surfaces. Supplied in a 2.7-litre container, the paint is suitable for application on concrete, masonry and rendered plinths to improve surface durability, weather resistance and ease of cleaning while providing an even, matt or low-sheen appearance depending on the chosen finish.

Advantages

The formulation offers good adhesion to mineral substrates and forms a protective film that reduces dirt pickup and increases resistance to wind and rain. As a ready-to-use product, it requires no on-site thinning and is easy to apply with brush, roller or spray equipment. The paint dries to a uniform colour and helps extend the service life of socles and plinths through improved surface sealing and mechanical resistance.

Suitable for

• Exterior socles and plinths on residential and commercial buildings
• Interior base walls and basement plinths in non-wet areas
• Concrete, masonry and rendered surfaces requiring protective decorative treatment
• Repair and refurbishment projects where uniform colour and surface protection are needed

Key specifications

• Package volume: 2.7 litres
• Type: ready-to-use plinth/socle paint
• Recommended substrates: concrete, masonry, render
• Finish: matt or low-sheen depending on formulation
• Application methods: brush, roller, spray
• Surface performance: increased dirt resistance and weather protection

How to use

Ensure surfaces are clean, dry and free from loose material, grease or mildew before application. Repair cracks and level uneven areas with suitable fillers and allow them to cure. Stir the paint thoroughly before use. Apply evenly with brush, roller or spray in one or more coats until the desired coverage and opacity are achieved, allowing recommended drying time between coats. Avoid application at temperatures below the manufacturer’s recommended range or in direct precipitation. Clean tools with water immediately after use.

Usage recommendations

For best results, test the paint on a small inconspicuous area to confirm adhesion and colour match. On highly porous or very absorbent substrates, apply a suitable primer or an initial sealing coat to improve coverage and uniformity. Follow local ventilation and safety guidance during application and drying.