Tile adhesive/grout VOREL 06320

VOREL 06320 tile adhesive/grout is a ready-to-use cement-based compound formulated for fixing ceramic, porcelain and natural stone tiles on a range of substrates. Designed for both indoor and outdoor use, the product combines good adhesion with moderate flexibility to accommodate small movements in the substrate while delivering a smooth, uniform finish appropriate for wall and floor tiling projects. Each pack contains one unit intended for small to medium-sized jobs where a consistent, durable joint and secure tile bond are required.

Advantages

The formulation provides reliable bond strength on common construction surfaces while remaining workable for easy application and finishing. It cures to a durable, water-resistant joint suitable for areas exposed to occasional moisture. The product is designed to reduce shrinkage and cracking, and its consistency allows for even coverage and a professional-looking result with minimal effort.

Suitable for

• Fixing ceramic and porcelain tiles on walls and floors
• Grouting joints between tiles in bathrooms and kitchens
• Interior tiling projects such as living rooms, halls and utility spaces
• Exterior installations on balconies, terraces and facades with limited movement

Key specifications

• Type: cement-based tile adhesive and grout
• Application: indoor and outdoor use
• Suitable substrates: cement screed, concrete, plaster, cement blocks and properly prepared existing tiles
• Coverage: suitable for small to medium-sized tiling jobs (coverage depends on tile size and joint width)
• Performance: water-resistant after curing; moderate flexibility to resist small substrate movements
• Finish: smooth, consistent grout lines and adhesive bed

How to use

Prepare the substrate by ensuring it is stable, clean, dry and free of dust, grease or loose particles. Mix the compound according to the manufacturer's instructions until a homogeneous, lump-free paste is obtained. Spread the adhesive with a notched trowel appropriate to the tile size, press tiles firmly into position and leave recommended gaps for grouting. After initial setting time, remove excess adhesive and fill joints with the grout component if required. Allow the product to cure fully before subjecting the surface to heavy loads or continuous water exposure; follow the specified drying times for optimal performance.

Usage recommendations

Use suitable personal protective equipment such as gloves and eye protection. Avoid application at temperatures below the recommended minimum or in direct frost. When applying on heated substrates or in direct sun, take measures to prevent rapid drying. Test adhesion on nonstandard or previously coated surfaces before full application and follow substrate preparation guidelines to ensure long-term performance.