Paint stirrer accessory Vorel 09077, length 500 mm, diameter 80 mm

Vorel 09077 paint stirrer accessory is a single-piece mixing paddle designed for use with compatible power drills and mixers. With a total length of 500 mm and an 80 mm working diameter, this accessory is intended for mixing paints, plasters, adhesives and similar viscous fluids to achieve a consistent, homogeneous mixture. The paddle combines a spiral polypropylene working section with a serrated edge to help break up lumps and reduce trapped air, supported by a galvanized steel rod for stability during operation.

Advantages

The polypropylene spiral section provides chemical resistance and durability when used with water-based and many solvent-based materials. The serrated edge improves dispersion of thicker sludges and pastes, while the galvanized steel rod offers rigidity and corrosion resistance under typical jobsite conditions. The HEX handle connection ensures secure attachment to drills and mixers that accept hex shanks, allowing efficient torque transfer and stable mixing at a range of speeds.

Suitable for

• Mixing paint and primer for interior and exterior applications
• Preparing plaster, joint compound and finishing mortars
• Mixing tile adhesive, cementitious adhesives and thinsets
• Combining epoxy, resin and two-component compounds (as compatible)
• On-site and workshop mixing where a compact, single-piece paddle is required

Key specifications

• Overall length: 500 mm
• Working diameter: 80 mm
• Working part material: polypropylene (spiral)
• Edge type: serrated for improved dispersion
• Rod material: galvanized steel
• Handle/connection: HEX shank

How to use

Attach the HEX shank securely into the chuck or adapter of a compatible power drill or mixing machine. Start mixing at low speed to incorporate materials without splashing, then increase speed gradually to achieve a smooth, homogeneous consistency. Keep the paddle submerged in the liquid while mixing to minimize air entrainment and stop periodically to scrape down container walls if required. After use, clean the paddle promptly with water or an appropriate solvent depending on the mixed material to prevent material buildup on the polypropylene surfaces.

Usage recommendations

Use personal protective equipment such as gloves and eye protection when mixing chemicals or dusty materials. Select a drill or mixer with adequate torque for the viscosity of the material being mixed and avoid prolonged overload to prevent motor strain. For two-component systems, follow manufacturer mixing ratios and pot-life guidelines and ensure compatibility of the paddle material with the components used.