Stove Chimney Pipe WADEX 180 mm Diameter, 0.5 m Length

WADEX stove chimney pipe with a nominal diameter of 180 mm and a length of 0.5 m is a straight metal flue section designed to connect stoves and other solid-fuel appliances to chimney systems. This component provides a dedicated passage for smoke and combustion gases and is intended for use where a 180 mm diameter flue connection is required. The straight pipe is suitable as a connector between appliance outlet and existing chimney, as an extension to reach an installed chimney, or as a replacement segment for damaged or corroded sections.

Advantages

The WADEX 180 mm chimney pipe is manufactured from metal to provide a robust, heat-resistant duct for exhaust gases. Its standard nominal diameter ensures compatibility with appliances and chimney components specified for 180 mm flues. The 0.5 m length offers a compact, manageable section that simplifies alignment and fitting during installation and reduces the number of joints needed in short runs. The straight design minimizes turbulence and helps maintain an unobstructed flue path.

Suitable for

• Connecting domestic wood-burning stoves to chimney systems with a 180 mm flue
• Extending an existing 180 mm chimney flue where short additional length is required
• Replacing a worn or damaged straight section of a 180 mm stove flue
• Indoor stove installations requiring a metal connector or extension piece

Key specifications

• Nominal inner diameter: 180 mm
• Length: 0.5 m (500 mm)
• Type: straight stove chimney pipe / flue section
• Material: metal construction suitable for hot exhaust gases
• Application: for use with solid-fuel appliances and chimney systems requiring a 180 mm flue

How to use

Measure the appliance outlet and existing chimney connection to confirm the 180 mm nominal diameter match before installation. Fit the WADEX pipe as a straight connector or extension by inserting the male end into the mating female-ended component or using the appropriate coupling or stove adapter as required by the installation. Ensure joints are secure and aligned to maintain a continuous flue path. Observe clearance requirements to combustible materials and follow any sealing, support, or fastening practices recommended for your stove and chimney components.

Usage recommendations

Installations should conform to local building codes and the stove manufacturer's instructions. Use the WADEX pipe only with compatible 180 mm components, maintain adequate clearances from combustibles, and arrange proper support for horizontal or offset sections. Regular inspection and cleaning of the flue system are advised to prevent soot buildup and ensure safe operation.