Stove chimney to the wall WADEX model D115 — Ø115 mm wall-mounted stovepipe connection

The WADEX model D115 wall-mounted stove chimney is a dedicated Ø115 mm stovepipe connection designed to pass flue gases through an external wall. It creates a sealed, direct pathway from a stove or wood-burning appliance to an external chimney outlet or flue system, suitable for installations where a short horizontal or slightly angled wall exit is required. The unit is intended for domestic heating setups and is compatible with appliances that accept a 115 mm exhaust interface.

Advantages

The WADEX D115 provides a compact, space-saving solution for routing exhaust through a wall while maintaining a secure seal against drafts and moisture. Constructed to match the diameter of standard 115 mm stovepipes, it simplifies connection between the appliance and the external flue and reduces the need for additional adapters. Its design supports safe evacuation of combustion gases and helps maintain proper draft when installed according to local building codes and manufacturer instructions.

Suitable for

• Domestic stoves and wood-burning heating appliances with a 115 mm outlet
• Situations requiring a short horizontal or slightly sloped wall penetration
• Retrofit installations where an external chimney connection is needed through a masonry or insulated wall
• Projects seeking a sealed transition from indoor appliance to outdoor flue

Key specifications

• Nominal pipe diameter: 115 mm (Ø115)
• Application: wall-mounted stovepipe connection for flue gas evacuation
• Compatibility: intended for use with stoves and wood-burning appliances accepting 115 mm connections
• Installation orientation: horizontal or short angled through-wall passage
• Function: provides a sealed and direct pathway from appliance to external chimney or flue system

How to use

Measure and prepare the wall opening to accommodate the Ø115 mm passage, following local building regulations and safety clearances recommended for combustible materials. Insert the WADEX D115 connection through the wall so that the inner flange mates securely with the stove outlet and the outer section aligns with the external chimney or termination. Ensure all joints between the appliance, stovepipe, and the wall-mounted connection are tight and properly sealed. Verify the correct slope and clearance for drainage of condensate if applicable, and complete any required external flashing or weatherproofing.

Usage recommendations

Installations should be carried out or inspected by a qualified installer. Always observe local codes, the stove manufacturer’s installation instructions, and recommended clearances to combustible materials. Routine inspection and maintenance of the stovepipe and wall connection are advised to ensure safe operation and to prevent soot buildup or obstruction.