Paint Sprayer WAGNER Control 150 M — 5.5 L, 350 W, for Acrylic and Latex Paints

The WAGNER Control 150 M — 5.5 L, 350 W is an electric paint sprayer intended for both indoor and outdoor painting tasks. With a 5.5 litre paint container and a 350 W motor powered by 230 V/50 Hz, it supports continuous spraying of acrylic and latex paints. The unit weighs 4.1 kg and includes a 7.5 m hose, enabling work on walls, ceilings, fences and furniture while maintaining steady material flow and coverage.

Advantages

The sprayer combines a high-capacity 5.5 L reservoir with a compact 350 W drive for prolonged use without frequent refills. A maximum working pressure of 110 bar and a delivery rate up to 0.9 l/min provide consistent atomisation suitable for water-based coatings. The 7.5 m hose increases reach and mobility, and the overall weight of 4.1 kg makes the device easy to carry between work locations. Acoustic emissions are approximately 78 dB, allowing predictable working conditions regarding noise.

Suitable for

• Interior walls and ceilings with acrylic or latex paints
• Exterior fences, sheds and garden furniture
• Wooden surfaces such as decking, doors and trim
• Large area repainting where faster application and even coverage are required

Key specifications

• Paint capacity: 5.5 litres
• Motor power: 350 W
• Supply voltage: 230 V / 50 Hz
• Maximum working pressure: 110 bar
• Maximum flow rate: 0.9 litres per minute
• Hose length: 7.5 metres
• Weight: 4.1 kg
• Suitable coating types: acrylic and latex water-based paints
• Approximate noise level during operation: 78 dB

How to use

Fill the 5.5 L container with a properly prepared acrylic or latex paint, following the paint manufacturer’s instructions for dilution if required. Secure the hose and spray gun, connect the unit to a 230 V / 50 Hz power supply, and test spray on a scrap surface to adjust spray pattern and flow. Hold the gun at a consistent distance from the surface and move at a steady speed to achieve even coverage. After completion, follow the cleaning procedure recommended for water-based paints to prevent nozzle clogging and ensure reliable future operation.

Usage recommendations

Use the WAGNER Control 150 M with thinned water-based paints suitable for airless or HVLP-style spraying as indicated by the paint manufacturer. Work in well-ventilated areas, use appropriate personal protective equipment such as masks and gloves, and store the sprayer and remaining paint in a dry, frost-free environment. Clean the hose and nozzle immediately after use to maintain performance and avoid blockages.