Cutting Saw Milling Cutter Wapienica FI 125.0 mm, thickness 3.0 mm, Z100A, bore 22 mm, HSS

Wapienica FI 125.0 is a 125 mm diameter high-speed steel (HSS) cutting saw milling cutter with a 3.0 mm blade thickness, Z100A fine-tooth configuration and a 22 mm bore. Engineered for precision cutting and milling, this HSS tool provides consistent edge quality and repeatable performance when mounted in compatible saws or milling machines. The combination of fine tooth count and HSS material makes it suitable for operations that require smooth finishing and controlled chip formation on a range of metallic materials.

Advantages

The HSS construction offers good hardness and wear resistance at typical cutting temperatures, supporting longer tool life in intermittent and continuous cutting. A 100-tooth equivalent fine-tooth geometry yields reduced burr formation and finer surface finish compared with coarse-tooth cutters. The 3.0 mm thickness balances rigidity for straight cuts with a narrow kerf to minimize material waste. The 22 mm bore ensures compatibility with common arbors and collets used in light and medium-duty machines.

Suitable for

• Precision metal cutting and slotting in light and medium machining
• Fine finishing operations where low burr and smooth edge are required
• Cutting thin-walled parts and sheet metal where narrow kerf is needed
• Use in compatible circular saws, milling heads and indexing fixtures

Key specifications

• Diameter: 125 mm
• Blade thickness: 3.0 mm
• Tooth configuration: fine-tooth Z100A
• Material: high-speed steel (HSS)
• Bore diameter: 22 mm
• Intended cutting type: precision cutting and milling of metals

How to use

Mount the cutter on a properly rated arbor or collet with a 22 mm bore fit and ensure the assembly is balanced before operation. Confirm machine speed and feed settings that match the HSS material characteristics and the workpiece type; lower surface speeds are typically used for ferrous metals while higher speeds may be possible for non-ferrous materials. Secure the workpiece and use appropriate clamping to prevent vibration. Periodically inspect the teeth for wear or damage and replace the cutter when cutting quality degrades.

Usage recommendations

Use cutting fluids or coolants compatible with HSS to improve tool life and surface finish when machining tougher metals. Maintain safe operating speeds and feeds as specified by your machine and tooling guidelines, and perform routine balancing and runout checks to preserve cut quality and extend service life.