Cutting Milling Cutter Wapienica FREZ PILKOWY FI 80.0 Z64 HSS d22

Wapienica FREZ PILKOWY FI 80.0 Z64 HSS d22 is a circular milling cutter made from high-speed steel (HSS) with an 80.0 mm diameter, 64 teeth and a 22 mm bore. It is designed for precision cutting and profiling in woodworking and light metalworking where a toothed milling tool is required for clean, repeatable cuts and efficient material removal. The construction and tooth geometry ensure consistent chip evacuation and reduced cutting forces when used at appropriate speeds and feeds.

Advantages

The HSS material provides good wear resistance and toughness for a range of cutting conditions while maintaining sharp cutting edges. With 64 evenly spaced teeth, the cutter produces smooth surfaces and fine profiles without excessive vibration. The 22 mm bore allows secure mounting on compatible arbors, ensuring concentric rotation and stable performance. The tool balances material removal efficiency with surface finish quality to support both finishing and semi-finishing operations.

Suitable for

• Profiling and edge milling of solid wood and veneered panels
• Shaping and trimming of plywood, MDF and chipboard
• Light alloy and non-ferrous metal cutting where a toothed cutter is appropriate
• Shop and production environments requiring repeatable cross-sections and clean edges

Key specifications

• Material: high-speed steel (HSS)
• Diameter: 80.0 mm
• Number of teeth: 64
• Bore (inner diameter): 22 mm
• Tool type: circular milling cutter (toothed/profile cutter)

How to use

Mount the cutter securely on a properly matched arbor with the 22 mm bore, ensuring correct fit and concentricity before operation. Set spindle speed and feed rate according to the material being machined and the cutter diameter; use lower speeds and lighter cuts for harder materials and higher speeds for softer woods. Advance the workpiece steadily and avoid interrupted cuts where possible. Inspect the cutter before use for any damage or uneven wear, and follow machine safety procedures including guards and eye protection.

Usage recommendations

For best results, use sharp cutters and appropriate coolant or air blast when machining non-ferrous metals. Adjust feed per tooth to maintain a consistent chip load and extend tool life. When working with wood, secure the workpiece firmly and make multiple light passes rather than heavy single cuts to reduce strain on the cutter and improve surface finish.