Leave your address - as soon as the price of the product goes down, you'll know about it right away
Audio Cable Warm Audio PRO-SPKR-6 1.8m 6.35mm TS Black
Audio Cable Warm Audio PRO-SPKR-6 1.8m 6.35mm TS Black
In cart {{totalProductsCount}} item(s)
Your cart is empty
Audio Cable Warm Audio PRO-SPKR-6 1.8m 6.35mm TS Black
Leave your address - as soon as the price of the product goes down, you'll know about it right away
Audio Cable Warm Audio PRO-SPKR-6 1.8m 6.35mm TS Black
Audio Cable Warm Audio PRO-SPKR-6 1.8m 6.35mm TS Black
The Warm Audio PRO-SPKR-6 is a 1.8 m speaker/instrument cable with 6.35 mm TS connectors on both ends, designed for straightforward analog audio connections. Constructed with high-quality copper conductors and a 16 AWG wire size, this black cable provides a durable, low-resistance path for signal transfer between instruments, amplifiers, mixers, and other audio equipment. Its balanced build and standard TS terminations make it compatible with common instrument and speaker jacks.
This audio cable uses high-quality copper conductors to maintain signal integrity and minimize loss over short to medium distances. The 16 AWG wire size offers a good balance between flexibility and low electrical resistance, reducing the risk of tone degradation when used with electric guitars, basses, keyboards, or speaker outputs. The 6.35 mm TS connectors are widely compatible and provide a secure fit in standard jacks, while the black outer jacket resists wear in typical studio or stage environments.
Insert one 6.35 mm TS connector into the output jack of the instrument or speaker, and the other connector into the input of the amplifier, speaker, mixer, or effects device. Ensure connectors are fully seated to avoid intermittent contacts or noise. Route the cable to avoid sharp bends, excessive tension, and proximity to power cables to reduce hum and interference. For temporary stage setups, coil excess length neatly to prevent tripping hazards.
Use this 1.8 m cable for short to medium runs where a reliable TS connection is required. Regularly inspect connectors for dirt or wear and, if necessary, clean contacts with appropriate contact cleaner. Avoid running the cable parallel to mains wiring and limit strain on connectors by securing cables near connection points.
{{highlightedFeature.featureTitle}}:
{{getProductFeatureValueById(product, highlightedFeature.featureId)}}