Wektor Kostka kolor 85×85 mm paving stone, thickness 35 mm

Wektor Kostka kolor 85×85 mm paving stone, thickness 35 mm is a compact concrete block intended for decorative and functional paved surfaces. Its 85×85 mm square format and 35 mm thickness make it suitable for modular patterns in gardens, patios, walkways and other light-traffic outdoor areas. The product is designed for straightforward laying and selective replacement, providing a uniform visual appearance and basic load-bearing performance for pedestrian zones and similar applications.

Advantages

The small square format allows for flexible patterning and tight joints, enabling detailed edging and visual accents in landscaping. Concrete construction offers consistent color and texture while remaining resistant to typical outdoor conditions when properly installed. Thin 35 mm thickness reduces material weight and eases handling during installation and replacement. The uniform geometry supports quick alignment and reduces cutting requirements for standard layouts.

Suitable for

• Garden paths and stepping areas
• Patio surfaces and decorative zones
• Walkways and pedestrian routes
• Edging and accent strips in larger paved areas

Key specifications

• Shape: square
• Dimensions: 85 × 85 mm
• Thickness: 35 mm
• Material: concrete
• Surface: textured for grip

How to use

Prepare a stable, well-drained base appropriate for light pedestrian loads, such as compacted sand or fine gravel over a subbase suited to site conditions. Spread and level a bedding layer, then place the 85×85 mm blocks in the desired pattern with consistent joint spacing. Use a rubber mallet to align and set each block flush with adjacent units. After laying, fill joints with fine sand and compact the surface to ensure stability. Replace individual blocks as needed by removing the joint material and extracting the unit, then inserting a new block and re-sanding the joints.

Usage recommendations

For best results use on pedestrian and light-traffic areas only; for vehicular driveways choose products with greater thickness and load rating. Ensure proper base preparation and edge restraint to avoid movement. Protect newly laid areas from heavy loads and prolonged moisture exposure during initial curing and settlement.