Jigsaw blades 5 pcs Wolfcraft 2383100 for wood, chipboard, laminate, plywood, cutting thickness up to 30 mm, tooth spacing 1.35–2.5 mm

Set of 5 Wolfcraft jigsaw blades designed for cutting wood-based materials including chipboard, laminate, parquet, hardwood and plywood. The pack contains a mix of BIM and HCS blades with tooth spacings from 1.35 to 2.5 mm and a maximum recommended cutting thickness of up to 30 mm. Blades are supplied in a practical storage box and are intended for general woodworking and renovation tasks where a combination of straight, curved and nail-resistant cuts is required.

Advantages

The combination of three BIM blades and two HCS blades offers versatility for different cutting needs: BIM blades provide durability and the ability to cut materials that may contain small metal inclusions, while HCS blades deliver clean, fine curved cuts in softer wood and laminates. Varied tooth spacing (1.35–2.5 mm) enables both fine finishing cuts and faster material removal. The blades are supplied in a compact storage box that keeps them organized and protected when not in use.

Suitable for

• Straight and curved cuts in chipboard and plywood
• Cutting laminate and parquet panels
• Trimming hardwood and softwood up to 30 mm thick
• Renovation tasks involving nails or small metal inclusions (use BIM blades)
• General DIY and professional woodworking applications

Key specifications

• Blade set quantity: 5 pieces (3 BIM, 2 HCS)
• Maximum cutting thickness: up to 30 mm
• Tooth spacing: 1.35 mm and 2.5 mm
• BIM blades: toothed length 75 mm, total length 100 mm, suitable for fine clean cuts and nail-resistant cutting
• HCS blades: toothed length 50 mm, total length 75 mm, optimized for clean curved cuts in softer materials
• Material compatibility: chipboard, laminate, parquet, hardwood, plywood
• Packaging: practical storage box for organized transport and storage

How to use

Select the blade type that matches the material and cut profile: use HCS blades for fine curved cuts in laminate and softer woods, and BIM blades when working with boards that may contain nails or require greater wear resistance. Install the blade in the jigsaw according to the tool manufacturer’s instructions, ensuring correct orientation and secure fastening. Adjust the jigsaw speed and feed rate to the material and tooth spacing, and make test cuts on scrap material to confirm settings before cutting the workpiece.

Usage recommendations

Wear appropriate eye and hand protection when operating a jigsaw. For the best results with laminate and parquet, use a HCS blade with finer tooth spacing and keep the base plate flush to the surface to minimize chipping. When encountering nails or metal fragments, switch to a BIM blade and reduce feed pressure. Store blades in the supplied box to protect teeth and maintain performance.