Diamond Drill Bit 8mm Wolfcraft GmbH Ceramic

The Diamond Drill Bit 8mm Wolfcraft GmbH Ceramic is an 8 mm diameter diamond-coated hole saw designed for use with cordless screwdrivers. Intended for drilling through tiles, fine stoneware, granite slabs and glazed tiles, this single drill bit comes packaged in a blister on card. The main body is turned from solid material for stable, precise operation, while the sawing edge is coated with industrial diamonds to enable cutting of very hard surfaces.

Advantages

The diamond coating on the sawing edge provides high wear resistance and the ability to cut hard ceramic and stone materials. Its solid-machined main body ensures concentric accuracy and long-term durability during repeated use. The bit is supplied in a blister pack for convenient storage and handling and is compatible with standard chucks of cordless drills.

Suitable for

• Drilling holes in ceramic tiles
• Cutting through fine stoneware and glazed tiles
• Making openings in granite slabs for sanitary fixtures and cable bushings
• Use with cordless screwdrivers for DIY and professional installation work

Key specifications

• Brand: Wolfcraft
• Model / MPN: 5917000
• EAN: 4006885591707
• Diameter: 8 mm
• Coating: Industrial diamond-coated sawing edge
• Body: Turned from solid material
• Pack type: Blister on card, single piece
• Intended machine: Cordless screwdrivers (drills with compatible chuck)

How to use

Fit the diamond drill bit into the chuck of a cordless screwdriver or drill and tighten securely. Position the bit on the marked drilling point and start drilling at low speed with light pressure to establish a guide groove. Increase speed gradually while maintaining steady, moderate pressure and use water or coolant if possible to reduce heat and extend tool life. After completing the hole, stop the drill and remove any debris before proceeding.

Usage recommendations

Use with appropriate personal protective equipment (safety glasses and gloves). For best results on ceramic and stone, keep the bit cooled with water and avoid excessive pressure to prevent damage to the tile and the bit.