Power drill accessory 3 pcs Wolfcraft GmbH 5953000

The Wolfcraft three-piece hole enlarging tool set (model 5953000) provides a safe, standard solution for neat, centred enlargement of existing boreholes with a hole saw. The set is supplied in a two-component case and contains three conical plastic enlarging tools for existing hole diameters Ø 35–51 mm, Ø 46–62 mm and Ø 54–70 mm, an insertion aid and three steel centring bushes Ø 6, 8 and 10 mm. A steel bushing in the centre accepts the appropriate centring drill bit and guides the hole saw to ensure aligned drilling and repeatable hole patterns, for example when replacing halogen ceiling spots with a larger LED system.

Advantages

The tool set guarantees centred alignment with the existing borehole, enables safe guidance of the hole saw via replaceable steel bushes, and covers a wide range of existing diameters (Ø 35–70 mm). The conical plastic cylinders screw into the existing hole with an integrated thread for a secure fit, and the insertion aid allows additional tightening to hold the tool securely during drilling. The set is designed for professional use and facilitates clean removal of the drilling core together with the hole enlarging tool.

Suitable for

• Enlarging existing circular holes in ceilings and walls
• Replacing smaller recessed lights (halogen) with larger fixtures (LED)
• Series drilling where an even hole pattern is required
• Professional and DIY electrical and installation work

Key specifications

• Brand: Wolfcraft
• Model / MPN: 5953000
• EAN: 4006885595309
• Contents: 3 hole enlarging tools, insertion aid, 3 steel bushes (Ø 6, 8, 10 mm)
• Suitable for existing hole diameters: Ø 35–51 mm, Ø 46–62 mm, Ø 54–70 mm
• Compatible with hole saws from Ø 60 mm, Ø 68 mm and Ø 76 mm (depending on enlarging tool)
• Case: two-component storage case
• Made in: European Union (Wolfcraft)

How to use

Select the enlarging tool that matches the existing borehole range, screw the conical plastic cylinder into the existing hole using the integrated thread, then install the appropriate steel centring bush (Ø 6, 8 or 10 mm) and insert the matching centring drill bit. Use the insertion aid to tighten the fit if necessary. Fit your hole saw to the drill, position it against the centred guide and drill the enlarged hole. After cutting, remove the hole enlarging tool together with the drilling core.

Usage recommendations

Use steady, controlled drilling speed and appropriate protective equipment (eye and ear protection). Check that the chosen centring bush matches the hole saw pilot drill. For overhead work, ensure secure support and take care to remove debris safely after drilling.