Hammer Drill Wolfcraft 7805010 Standard

The Wolfcraft 7805010 Standard hammer drill is designed for drilling into hard materials such as concrete, granite, brick and various natural and artificial stones. It is intended for use with hammer drills that accept SDS-plus holders and is supplied as a single hammer drill in plastic bag on card packaging. The tool parts described (TCT cutting plate, hardened helix and shank, 130° point angle) refer to the drill bit design used with SDS-plus hammer drills.

Advantages

The drill bits feature a specially soldered, fully embedded TCT (tungsten carbide tipped) cutting plate for improved cutting durability. Helix and shank are specially hardened to increase wear resistance during hammer drilling. The 130° point angle is specified for effective penetration in masonry and stone. The product is supplied in a practical plastic bag on card for retail presentation.

Suitable for

• Hammer drills with SDS-plus holder
• Concrete and granite
• Brick walls and natural stone
• Artificial stone and masonry

Key specifications

• Brand: Wolfcraft
• Model / MPN: 7805010 Standard
• EAN: 4006885780507
• Material (cutting plate): TCT (tungsten carbide tipped)
• Point angle: 130°
• Compatibility: SDS-plus holder
• Packaging: plastic bag on card

How to use

Fit the appropriate SDS-plus drill bit into a compatible hammer drill according to the drill and machine manufacturer’s instructions. Mark the drilling position, secure the workpiece if needed and set the hammer function and appropriate speed on the machine. Apply steady pressure and start drilling; avoid excessive lateral force. After use, clean dust from the bit and inspect the TCT tip for wear before storing.

Usage recommendations

Use the Wolfcraft 7805010 with SDS-plus hammer drills and appropriate personal protective equipment (safety glasses, hearing protection and dust mask). For best tool life, use correct drilling speed and moderate pressure, and replace bits if the TCT tip becomes chipped or excessively worn.