Flooring tool Wolfcraft 6976000 for laminate installation, accessory kit

Wolfcraft 6976000 Flooring tool for laminate installation is an accessory kit that combines a universal angle & try square, a contour gauge and a laminate fitter to support accurate measuring, marking and final adjustments when laying laminate and design flooring. The kit is intended for both DIYers and professionals and helps align boards, transfer precise cutting lines for end boards and trace irregular wall profiles while protecting panel edges during tapping and joining.

Advantages

The universal angle & try square integrates a flat square, angle measuring scale, parallel marker, marking stencil and drill guide in one compact device, allowing measurement and transfer of right-angle cuts and square recesses without additional tools. The contour gauge features 91 fine tracer pins that duplicate complex profiles up to 130 mm wide and 30 mm deep and locks with a clamping lever for secure transfer. The laminate fitter has a sliding wheel, spring-guided gliding elements and a removable stop to transfer the exact width and contour of the last row including the expansion joint, with an extra-wide bar for stable placement of boards.

Suitable for

• Measuring and marking end boards when installing laminate and design flooring
• Tracing and transferring irregular wall profiles such as pipe cut-outs and skirting offsets
• Ensuring correct 90° cuts and square recesses during board fitting
• Protecting board edges and aligning panels while tapping and joining

Key specifications

• Includes: universal angle & try square, contour gauge, laminate fitter
• Contour gauge: 91 tracer pins, traceable width up to 130 mm, depth up to 30 mm
• Laminate fitter: extra-wide bar, adjustable dimensions up to 250 mm on the bar, clamping width up to 235 cm
• Universal angle & try square: flat square, angle measuring scale, parallel marker, marking stencil and drill guide integrated; removable plastic limit stop; scales on both sides
• Materials: metal construction for the angle/try square, durable plastic for the contour gauge

How to use

Use the universal angle & try square at the end of the fitted row to measure and transfer the correct board length: align the tool at the board edge, use the stop to mark the 90° cut and read the integrated scales for any necessary offsets. For irregular shapes such as pipe penetrations, press the contour gauge pins against the profile to copy the contour, then fix the shape with the clamping lever and transfer the traced line onto the board for cutting. For the last row, position the laminate fitter with its sliding wheel and spring-guided gliding elements against the wall profile, set the required offset including the expansion joint and mark the board; the wide bar provides stable support while transferring measurements.

Usage recommendations

Before cutting, always check measurements twice and secure tracer pins with the clamping lever. Keep the removable stop and scales clean and free of debris for accurate readings. When using the laminate fitter, simulate the wall profile with the sliding elements to ensure the expansion gap is accounted for and avoid forcing boards during tapping to prevent edge damage.