Clamp VOREL 38433 by YATO — iron and steel construction, 1 pc

VOREL 38433 clamp by YATO is a single-piece C-type screw clamp designed for general fastening, holding and light-duty clamping tasks in workshops, repairs and assembly. Constructed from cast iron and steel components, the clamp offers a rigid body resistant to twisting and impact and a large pressure plate for precise contact with the clamped material. Supplied as one piece per pack, this clamp is intended for applications where a robust metal construction and secure temporary fixtures are required.

Advantages

The clamp features a continuous cast iron body with high stiffness that reduces deformation under load and resists twisting and beating. A steel pressure screw finished by tinning (A3) works in combination with a tube thread to provide very strong tightening and improved vibration resistance that minimizes loosening during use. A movable strap on the pressure screw prevents accidental loss of components, while the large pressure plate secured with a pin ensures stable, precise contact with workpieces. The exterior is protected with a powder-coated paint layer to reduce corrosion in workshop environments.

Suitable for

• Securing parts during welding and metal fabrication
• Temporary fixtures in carpentry and roofing work
• General holding and clamping in repair and assembly tasks
• Light to moderate load construction applications

Key specifications

• Construction materials: continuous cast iron body, steel pressure screw
• Clamp type: C-type screw clamp
• Surface finish: powder-coated body, tin-plated (A3) pressure screw
• Pressure screw features: tube thread, movable retaining strap
• Pressure plate: large surface area, pinned attachment for precise contact
• Mechanical properties: high stiffness, resistance to twisting and impact, improved vibration resistance
• Pack quantity: 1 piece per pack

How to use

Position the clamp so the C-shaped frame embraces the workpiece and align the large pressure plate against the surface to be held. Turn the pressure screw clockwise to advance the plate until firm contact is made, using the movable strap as needed to prevent loss of the screw assembly. Tighten until the workpiece is securely held but avoid excessive torque that could damage the material or the clamp. To release, rotate the screw counterclockwise until the pressure is relieved and remove the clamp.

Usage recommendations

For best performance, use the clamp on clean contact surfaces and avoid sharp edges that could concentrate stress on the pressure plate. Inspect the screw thread and movable strap before use and reapply light lubrication to the thread if needed. Store the clamp in a dry place to preserve the powder-coated finish and tin-plated screw.