Shim / Spacer / Washer set YATO YT-068652 — 450 pieces

YATO YT-068652 — 450-piece shim, spacer and washer set designed for alignment, spacing, load distribution and gap adjustment in mechanical assemblies. The kit contains a wide range of thin metal washers in multiple outer/inner diameter and thickness combinations, supplied in quantities intended to cover common needs in automotive repair, machinery maintenance and general installation tasks.

Advantages

The set provides a large assortment of precisely stamped shims and washers so you can select the correct thickness and diameter for fine adjustment without cutting or machining. Supplied in defined counts per size, the kit reduces the need to source individual parts and supports repeatable assembly tolerances. Compatibility with standard bolts and shafts makes these metal spacers suitable for load distribution and alignment in metal-to-metal interfaces.

Suitable for

• Automotive repair and assembly tasks requiring precise spacing and shimming
• Machinery maintenance and rotating assemblies where gap control is necessary
• Construction and metal fabrication for bolt preload and load distribution
• General workshop use for alignment, leveling and vibration reduction

Key specifications

• Contents: 450 metal washers/shims/spacers in assorted sizes and thicknesses
• Materials: stamped metal (steel)
• Thickness range: 1.0 mm, 1.2 mm, 1.5 mm and 2.0 mm
• Inner diameters and quantities include common bore sizes for bolts and shafts
• Pack configuration includes multiple pieces per size for repeatable use

How to use

Select a washer size that matches the shaft or bolt inner diameter and provides the required clearance or preload. Slide the shim or spacer onto the bolt, stud or shaft until it seats against the mating surface, then tighten the fastener to the recommended torque for the assembly. For precise gap adjustments, combine multiple shims to reach the desired total thickness. Verify alignment or clearance after assembly and re-tighten if required.

Usage recommendations

Store the set in a dry environment to avoid surface corrosion. For critical assemblies, confirm material compatibility and follow torque specifications; when stacking shims, ensure flat, clean contact surfaces to maintain accuracy.