Spade drill bit Yato YT-3243 1.8 cm diameter 1 pc

The Yato YT-3243 spade drill bit is designed to create clean, straight holes with a diameter of 1.8 cm. Manufactured by YATO, this single-piece bit is intended for use with handheld and drill-press tools suited to standard hex or round shanks. Its flat paddle shape concentrates cutting at the center point and along the spade edges to remove material efficiently and produce a defined hole profile.

Advantages

The spade geometry ensures fast material removal and reduced drilling time compared with twist bits of similar diameter. Its hardened cutting edges maintain performance across multiple uses, while the single-piece construction offers durability under typical DIY and professional workloads. The relatively slim 1.8 cm diameter makes it suitable where moderate hole size and manageable torque are required.

Suitable for

• Drilling through softwoods and common construction lumber
• Making holes in plywood, chipboard, and similar sheet materials
• Creating cable and pipe passthroughs in wooden studwork
• General household and workshop drilling tasks requiring a 1.8 cm hole

Key specifications

• Tip design: spade (flat paddle) for rapid cutting
• Nominal diameter: 1.8 cm
• Item quantity: single piece
• Material compatibility: wood and wood-based panels
• Suitable drive: standard drill chucks accepting compatible shank

How to use

Secure the spade bit in the drill chuck ensuring the shank is seated and tightened. Mark the drilling position and, if precision is required, use a center punch or small pilot hole to prevent walking. Start drilling at low speed to establish the hole, then increase speed while applying steady, moderate pressure. Withdraw the bit periodically to clear chips and prevent clogging. For thicker or hardwood materials, use controlled feed and cooling pauses to avoid overheating.

Usage recommendations

Use the Yato spade bit primarily for wood and wood-based materials. Ensure the drill’s speed and torque settings match the material and bit diameter; lower speed for larger diameters and harder woods. Wear appropriate eye protection and follow standard safety practices when operating power tools.