Auger drill bit Yato YT-3277 2 cm diameter 1 pc

The Yato YT-3277 auger drill bit with a 2 cm diameter is a single-piece tool engineered for efficient and accurate drilling in wood and similar materials. Its spiral design facilitates fast chip removal and steady penetration, helping maintain clean holes and consistent rotation during use. Constructed to withstand repeated operation, this auger bit is intended for tasks where a straight, smooth bore is required.

Advantages

This auger drill bit offers precise 2 cm diameter drilling with a screw-tip geometry that helps pull the bit into the material for controlled feed rate. The spiral flute design promotes rapid evacuation of wood chips, reducing clogging and heat buildup. As a single-piece bit, it provides structural integrity and stable performance under normal operating conditions.

Suitable for

• Drilling clean, straight holes in soft and hardwoods
• Carpentry and joinery tasks requiring 20 mm bores
• Installing wooden dowels, bolts, or running wiring through timber
• General woodworking and renovation projects

Key specifications

• Diameter: 20 mm
• Type: Auger (spiral) drill bit
• Construction: Single-piece design for rigidity
• Intended materials: Wood and similar fibrous materials

How to use

Select a compatible drill or brace that accepts the auger bit shank and secure the bit firmly in the chuck. Mark the drilling location and, if necessary, use a center punch or pilot mark to prevent walking. Start drilling at low speed to engage the screw tip, then increase speed while applying steady axial pressure; allow the screw tip and flutes to pull the bit into the workpiece rather than forcing it. Withdraw the bit occasionally in deep holes to clear chips and prevent binding. After use, clean wood debris from the flutes and store the bit dry to reduce corrosion risk.

Usage recommendations

For optimal results, match drill speed and feed to the type of wood being drilled: lower speeds for hardwoods, moderate speeds for softwoods. Use appropriate personal protective equipment, including eye protection and hearing protection when operating power drills. Inspect the cutting edge before use and replace the bit if it shows significant wear or damage.