Hole saw YATO YT-3345 – diameter 10.2 cm, 1 pc

YATO YT-3345 is a single-piece hole saw with a cutting diameter of 10.2 cm, supplied as one unit per pack. It is intended for making large round openings in materials suitable for hole saw use and is compatible with standard arbors and drills that accept hole saws. The tool combines a hardened cutting rim with a solid body to provide consistent hole geometry for installations such as pipes, cable entries and fixture fittings.

Advantages

The hole saw offers a precise 10.2 cm cutting diameter for repeatable round holes and a one-piece construction that reduces wobble during cutting. Its robust build improves durability under workshop and on-site conditions, and the single-item supply makes it easy to select the correct size for specific tasks. The design allows effective chip evacuation when used with appropriate pilot bits and arbors, contributing to cleaner cuts and longer tool life.

Suitable for

• Cutting circular holes for pipe penetrations and conduit entries
• Creating openings for recessed fixtures and ventilation grilles
• Making holes in drywall, wood and other materials compatible with hole saws

Key specifications

• Cutting diameter: 10.2 cm
• Quantity in pack: 1 piece
• Construction: single-piece hole saw
• Compatibility: fits standard hole saw arbors and drills that accept hole saw attachments
• Intended use: drilling large round openings in hole-saw-compatible materials

How to use

Fit the hole saw onto a compatible arbor and install a suitable pilot bit if required by the arbor system. Secure the arbor in the drill chuck and set the drill to an appropriate speed for the work material. Mark the hole centre on the workpiece, position the pilot bit, and start drilling with steady, even pressure. Allow the tool to cut without forcing; withdraw periodically to clear chips if necessary. After cutting, remove the cut-out plug and inspect the edge for burrs, deburring if required.

Usage recommendations

Use appropriate protective equipment, such as safety glasses and gloves, and select correct drill speed and pilot bits for the material being cut. For harder materials, reduce speed and use cutting lubricant if applicable. Ensure the workpiece is securely clamped to prevent movement while drilling.