Masonry chisel YATO YT-6247 — single-piece chisel for masonry and stone work

The YATO YT-6247 masonry chisel is a single-piece hand tool designed for masonry and stone work. Supplied as one chisel per pack, it is intended for cutting, shaping and removing mortar, brick and stone material. The tool is built to provide controlled manual chipping and material removal in general construction, repair and renovation tasks where a durable, impact-resistant chisel is required.

Advantages

This chisel combines a hardened CRV60 steel blade with a design geared toward impact use. The blade hardness provides wear resistance during repeated striking and allows for accurate shaping of masonry and stone. The tool is constructed as a single-piece unit to reduce the number of joints and potential failure points, and the handle area is reinforced with a metal cover to increase durability under hammer blows.

Suitable for

• Cutting and trimming mortar joints
• Shaping and removing small sections of brick or stone
• Repair and renovation work on masonry surfaces
• Controlled manual chipping where power tools are impractical

Key specifications

• Type: single-piece masonry chisel designed for manual impact use
• Blade material: CRV60 steel
• Blade hardness range: approximately 50–58 HRC
• Handle: classic wooden handle adapted for beating, with metal reinforcement at the striking end
• Pack quantity: 1 chisel per pack

How to use

Place the chisel edge against the material to be removed with the bevel oriented as required for the cut. Hold the handle firmly and strike the reinforced end with a suitable hammer or mallet to drive the blade into mortar, brick or stone. Remove small sections gradually, working from the edges of the area toward the center to maintain control. Inspect the blade periodically for wear or deformation and re-sharpen using appropriate grinding techniques if required.

Usage recommendations

Use appropriate personal protective equipment such as safety glasses, gloves and hearing protection. For best results on harder stone or very large-scale removal, consider combining manual chiseling with suitable power tools; avoid excessive force that can damage the chisel or substrate. Store the chisel in a dry place and protect the cutting edge when not in use.