Angle Grinder Yato YT-82097

The Angle Grinder Yato YT-82097 is a compact hand-held tool designed for grinding, cutting, and surface preparation. It is driven by an 850 W motor that delivers a maximum no-load speed of 12,000 RPM and accepts a 12.5 cm grinding disc with a 2.2 cm bore. Weighing approximately 2.1 kg and supplied with a 3 m power cable, the tool balances power and mobility for use in workshops, construction sites, and home projects. Built-in overheating protection helps maintain safe operation during extended use, and the black-and-orange housing provides clear visual identification.

Advantages

The Yato YT-82097 combines a high-revving 850 W motor with a relatively small disc diameter to offer good control for precision grinding and cutting tasks. Its 2.1 kg weight makes it easier to handle for longer periods compared with heavier models, while the 3 m cable increases reach without the immediate need for extension cords. Overheating protection reduces the risk of motor damage under heavy loads, and the compact form factor supports operation in confined spaces.

Suitable for

• Grinding and smoothing metal surfaces
• Cutting thin metal sheets, rebar and pipes
• Removing rust, paint and old coatings
• Shaping and edging stone, concrete, and masonry (with appropriate disc)
• DIY projects, small repair and maintenance tasks

Key specifications

• Rated power: 850 W
• Maximum no-load speed: 12,000 RPM
• Disc diameter: 125 mm
• Disc bore size: 22 mm
• Weight: 2.1 kg
• Cable length: 3 m
• Housing colour: black and orange
• Safety feature: overheating protection

How to use

Before first use, inspect the grinder, power cable and plug for damage and ensure the correct disc type and size is fitted and securely tightened. Always use appropriate personal protective equipment (eye protection, gloves, hearing protection and a dust mask). Connect the tool to a properly grounded outlet and hold it with both hands when operating. Start the grinder and allow it to reach full speed before contacting the workpiece; apply steady, even pressure without forcing the tool. After use, switch off power and wait for the disc to stop completely before setting the tool down or changing accessories. Allow the motor to cool if overheating protection has activated.

Usage recommendations

Use discs and accessories rated for the 125 mm diameter and 22 mm bore. For metal work, select grinding or cutting discs designed for steel; for masonry, use diamond or abrasive discs suited to stone or concrete. Maintain consistent pressure and avoid side-loading cutting discs. Periodically check carbon brushes, ventilation slots and the power cable for wear, and store the grinder in a dry place when not in use.