Angle grinder YATO YT-82098 — 125 mm disc, 1400 W, 12,000 RPM, 2 kg

YATO YT-82098 is a compact 125 mm angle grinder with 1400 W input power and a maximum no-load speed of 12,000 RPM. Designed for cutting, grinding and surface preparation, this tool features a 22 mm disc bore, a 3 m power cable and Class II double-insulation protection. At approximately 2 kg, the grinder balances power and portability for workshop and construction site tasks and is suitable for work on metal and masonry.

Advantages

The grinder combines a high rotational speed with a 125 mm disc diameter to deliver efficient cutting and rapid material removal while keeping the tool lightweight. Class II insulation increases user safety by reducing reliance on grounding. A 3 m cable offers extended reach without immediate need for extension cords, and the 22 mm bore ensures compatibility with a broad range of standard discs. The compact design and balanced weight improve handling during prolonged use.

Suitable for

• Cutting steel rods, rebar and metal sheets
• Grinding welds and removing rust from metal surfaces
• Cutting and shaping masonry, brick and concrete blocks
• Surface preparation prior to painting or coating
• Light to medium fabrication and maintenance tasks in workshops and on-site

Key specifications

• Disc diameter: 125 mm
• Input power: 1400 W
• No-load speed: up to 12,000 RPM
• Disc bore: 22 mm
• Power cable length: 3 m
• Protection class: Class II (double insulation)
• Approximate weight: 2 kg
• Colour: Orange and Black

How to use

Fit a compatible 125 mm disc with a 22 mm bore and securely tighten the flange nut before connecting to mains power. Hold the tool with both hands using the main handle and the auxiliary handle for controlled cutting or grinding motions. Allow the disc to reach full speed before contacting the workpiece and apply steady, moderate pressure. For cutting, follow the marked line and let the disc do the work; for grinding, move the tool in smooth passes to achieve an even finish. After use, switch off the grinder and wait until the disc stops completely before setting the tool down or changing accessories.

Usage recommendations

Use appropriate personal protective equipment including safety goggles, hearing protection, gloves and respiratory protection when working with metal or masonry. Choose the correct disc type (cutting, grinding, masonry) for the material and inspect discs for damage before use. Maintain proper ventilation when working indoors and avoid exposing the tool to wet conditions. Regularly check the power cable and housing for damage and follow the manufacturer's maintenance guidance.