YATO YT-8411 is a pack of 50 waterproof sanding paper sheets sized 230 x 280 mm with P400 grit, intended for manual sanding. The sheets are suitable for fine sanding, surface preparation and smoothing of wood, paint, lacquer and filler. They are compatible with hand sanding blocks and manual sanding techniques used for finishing and preparation work.
Advantages
The waterproof P400 abrasive provides a fine, consistent finish and can be used wet or dry to reduce clogging and improve longevity. Sheets in a standard 230 x 280 mm format fit common hand sanding blocks and allow for controlled, even material removal during finishing operations.
Suitable for
- Fine sanding of wood surfaces
- Smoothing painted or lacquered surfaces
- Final preparation of filler and putty before painting
- Manual finishing with hand sanding blocks
When it may not be suitable
This P400 grit is intended for fine sanding and finishing tasks; it is not suitable for heavy material removal, aggressive shaping or rapid stock removal. For coarse sanding or stripping of thick coatings, use a lower-numbered (coarser) grit abrasive.
Key specifications
- Format: 230 x 280 mm
- Grit: P400 (fine)
- Quantity: 50 sheets per pack
- Waterproof: yes (suitable for wet or dry use)
- Compatibility: designed for manual sanding and hand sanding blocks
How to use
Select the P400 sheets for final smoothing and surface preparation. Attach a sheet to a compatible hand sanding block or use by hand with even pressure, moving along the grain of wood or following the contour of the surface. For wet sanding, keep the surface and abrasive damp to reduce clogging and achieve a smoother finish; rinse and replace sheets as they wear.
What to consider before purchase
- Intended use: P400 is for fine finishing, not for heavy sanding
- Sheet size: 230 x 280 mm must match your sanding block or tooling
- Quantity: pack of 50 sheets—check if this meets your project needs
Usage recommendations
For best results use the sheets with a hand sanding block and apply light, even pressure. When wet sanding, change sheets when they clog and keep the workpiece evenly lubricated to avoid scratches.
