Drill pump Yato YT-89000 1 pc(s)

The Yato YT-89000 drill pump is a compact accessory designed for efficient fluid transfer when powered by a compatible standard drill. Lightweight and portable, it enables quick evacuation of water from pools, aquariums, condensation trays or shallow flooded areas. The pump connects directly to a drill chuck and uses the drill's rotation to operate an internal impeller, providing a simple mechanical solution for moving liquids without the need for separate electric motors or hoses with integrated pumps.

Advantages

The drill pump delivers rapid setup and straightforward operation by attaching to most standard drills, reducing the need for dedicated pumping equipment. Its compact construction makes it easy to store and transport. The absence of an integrated power unit lowers weight and cost while maintaining effective water transfer for short-term tasks. Designed for basic maintenance and emergency removal of liquids, the pump offers a practical balance between portability and performance.

Suitable for

• Draining small pools and paddling pools
• Emptying aquariums and fish tanks
• Removing water from basements, garages or shallow flooded areas
• Draining condensate trays and HVAC drip pans
• Transferring non-corrosive liquids for maintenance tasks

Key specifications

• Drive type: drill-powered mechanical pump
• Material: corrosion-resistant plastics and rubber components for liquid contact
• Connection: standard drill chuck compatible coupling
• Flow characteristics: suitable for short bursts of water transfer; designed for low-viscosity liquids
• Portability: lightweight and compact for handheld use

How to use

Insert the pump shaft into the drill chuck and secure it according to the drill manufacturer’s instructions. Place the pump inlet into the liquid to be removed and position the outlet hose or discharge point to a suitable drainage location. Start the drill at low speed to engage the impeller, then adjust speed as needed to achieve the desired flow while monitoring stability and preventing splashing. After use, stop the drill, remove the pump from the liquid, flush with clean water if appropriate, and allow components to dry before storing.

Usage recommendations

Use only with drills rated for the required rotational speed and torque; avoid excessive drill speed to prevent damage to the pump. Do not use with flammable, corrosive, or high-viscosity fluids. Rinse and dry the pump after contact with dirty water to prolong service life. Wear appropriate protective equipment when handling contaminated liquids.