RFID Card Reader ZKTECO KR610D 13.56MHz MIFARE DESFire Wiegand 66

ZKTECO KR610D is an RFID card reader operating at 13.56 MHz, compatible with MIFARE and DESFire cards and providing Wiegand 66 output for access control systems. The reader has a compact, robust ABS/PC housing with LED indicators and is suitable for mounting on door frames. Rated IP65 and supporting an operating range from -20°C to +65°C, it is designed for both indoor and outdoor installations where contactless card authentication is required.

Advantages

The KR610D supports fast contactless reading of MIFARE and DESFire cards with a read range up to 5 cm and a typical scan time up to 300 ms. Its Wiegand 66-bit output ensures compatibility with standard access control panels. The device is weatherproof (IP65), has low power consumption (<70 mA) and a wide voltage input (6–14 V DC). The compact dimensions and included 1.5 m cable simplify installation on metal door frames and allow one-door control from both sides.

Suitable for

• Access control for commercial and institutional buildings
• Employee authentication and time-and-attendance integrations
• Visitor management and secure entry points

Key specifications

• Operating frequency: 13.56 MHz (ISO14443A)
• Compatible cards: MIFARE, DESFire
• Read distance: up to 5 cm
• Scan speed: up to 300 ms
• Output protocol: Wiegand 66-bit
• Current consumption: <70 mA
• Supply voltage: 6–14 V DC
• Protection class: IP65
• Materials: ABS, PC
• Operating temperature: -20°C to +65°C
• Operating humidity: 10%–90% RH
• Dimensions: 75 × 116 × 16 mm
• Cable length: 1.5 m

How to use

Mount the reader on a suitable surface or metal door frame using the recommended fixings, ensuring the cable reaches the access control panel. Connect power (6–14 V DC) and the Wiegand 66 output wires to the controller according to the controller manufacturer’s wiring diagram. Present a compatible MIFARE or DESFire card within the read distance (up to 5 cm); the built-in LEDs will indicate access granted or denied. Verify operation and adjust mounting position if necessary to achieve reliable reads.

Usage recommendations

For reliable long-term operation, install the KR610D where it is protected from direct impact and heavy soiling, avoid exposing connections to standing water, and use a stable DC power supply within the specified voltage range. Periodically check cable integrity and clean the reader surface with a soft, dry cloth.