ACT networking cable DA6951 Cat6a U/FTP (STP) Black 1.5 m with RJ-45 connectors, gold-plated contacts

ACT DA6951 is a Cat6a U/FTP (STP) slimline patch cable in black with a length of 1.5 m and RJ‑45 to RJ‑45 connectors. Its reduced outer diameter improves airflow in server racks and network cabinets while maintaining the shielding and performance needed for high-speed Ethernet and 10 Gigabit networks. Full copper 32AWG conductors and 50 µm gold‑plated RJ45 contacts provide reliable signal transfer and corrosion resistance, and the LSZH jacket limits toxic smoke if the cable is damaged by fire or overheating.

Advantages

The slim 3.8 mm jacket and smaller bend radius allow denser cable routing and better ventilation in cabinets compared with standard CAT6A patch cords. Shielded U/FTP construction reduces crosstalk and electromagnetic interference for stable LAN and data centre connections. Gold‑plated contacts and full copper conductors support consistent signal quality and durability.

Suitable for

• 10 Gigabit Ethernet and high-speed LAN connections
• Data centre and server rack cable runs where space and airflow are critical
• Connections behind equipment or inside network cabinets with limited clearance

When it may not be suitable

This slimline cable is optimized for space-constrained installations; in situations that require more ruggedized or thicker outdoor-rated cabling, a standard-diameter or weatherproof cable may be more appropriate. The angled-up to angled-up connector orientation is intended for specific port layouts and may not match every installation without checking connector directions.

Key specifications

• Category: Cat6a U/FTP (shielded pair)
• Length: 1.5 m
• Conductor: solid/stranded full copper, 32 AWG
• Connectors: RJ‑45 angled 90° up to RJ‑45 angled 90° up with 50 µm gold plating
• Outer jacket diameter: 3.8 mm (slimline)
• Jacket material: Low Smoke Zero Halogen (LSZH)
• Colour: Black

How to use

Plug the angled RJ‑45 connector into the device or patch panel port that best matches the cable orientation. Route the slimline cable through the rack or cabinet to maintain the recommended bend radius and to optimize airflow. Ensure both ends are fully seated in the RJ‑45 ports; test the connection with network testing tools or link lights to confirm proper operation.

What to consider before purchase

• Confirm that angled-up to angled-up RJ‑45 connectors suit your port layout
• Verify 1.5 m length meets the required run between devices or to the patch panel
• Ensure a shielded Cat6a cable is appropriate for your EMI environment

Usage recommendations

Use this slimline Cat6a U/FTP patch cable for dense rack or cabinet installations where preserving airflow and maintaining 10 Gigabit performance are priorities; avoid sharp bends and secure cables to prevent strain on the angled connectors.