ACT networking cable DA7930 Cat6a U/FTP (STP) Black 0.15 m with RJ-45 gold-plated contacts

ACT DA7930 is a 0.15 m Cat6a U/FTP (STP) slimline patch cable with RJ-45 connectors angled 90° down on one end and 90° up on the other. The cable has a reduced outer diameter of 3.8 mm compared with standard Cat6a cords, which improves airflow in server racks and network cabinets while preserving the required bend radius. The jacket is Low Smoke Zero Halogen (LSZH) and the cable uses full copper 32 AWG conductors with 50 µ gold-plated RJ45 contacts, meeting international standards for Ethernet patching.

Advantages

The slim 3.8 mm diameter and smaller bend radius allow denser cable routing and better ventilation in cabinets and behind equipment. Angled RJ45 connectors on both ends make the cable suitable for tight spaces without stressing the cable exit points. LSZH jacket reduces the risk of high concentrations of toxic gases in case of fire. Full copper 32AWG conductors and gold-plated contacts provide reliable signal transmission and corrosion resistance.

Suitable for

• Short patching between switches, patch panels and keystone jacks in network cabinets
• Connections behind rack-mounted equipment where space is limited
• High-density cable installations requiring improved airflow

When it may not be suitable

This 0.15 m cable is intended for very short connections; it is not suitable for longer in-room or building runs. If straight connectors or different connector orientations are required, choose a variant with straight or left/right angled RJ45 connectors instead.

Key specifications

• Category: Cat6a (U/FTP, STP)
• Length: 0.15 m
• Cable outer diameter: 3.8 mm (slimline)
• Conductor: Full copper, 32 AWG
• Connectors: RJ45 angled 90° down to RJ45 angled 90° up
• Contacts: 50 µ gold-plated
• Jacket: LSZH (Low Smoke Zero Halogen)
• PoE support: up to 30 W
• Colour: Black

How to use

Plug the angled RJ45 connectors into the appropriate ports on switches, patch panels or devices, orienting the down and up angles to match the available space and port direction. The short length is designed for connections inside network cabinets or directly between adjacent devices; avoid stretching the cable and ensure bend radii are not exceeded during installation.

What to consider before purchase

• Required cable length — this product is 0.15 m for very short patching
• Connector orientation — this model uses 90° down to 90° up angled RJ45 plugs
• Compatibility with PoE devices — supports up to 30 W
• Environmental and safety requirements — LSZH jacket for reduced toxic fumes

Usage recommendations

Use this slimline Cat6a U/FTP patch cable for short, high-density connections in racks and cabinets where maintaining bend radius and improving airflow are priorities; select other connector orientations or lengths if your installation requires straight plugs or longer reach.